|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Rubber gasket for Hermann boiler (140003056)
The rubber gasket for Hermann boilers is an essential component that ensures the sealing of connections in heating systems. It is compatible with various boiler models and helps prevent leaks while enhancing the efficiency of the device. The inner diameter of the gasket is 14 mm, the outer diameter is 19 mm, and the thickness is 2.5 mm. This component is commonly used in both residential and commercial boilers, making it a necessity for professional repair technicians and DIY enthusiasts.
Technical specifications
| Parameter | Value |
|---|---|
| Inner diameter | 14 mm |
| Outer diameter | 19 mm |
| Thickness | 2.5 mm |
Compatible models
- HABITAT 2 23 E
- HABITAT 23 SE
- MICRA 2 23 E (from serial number 53184/35.10)
- MICRA 2 24 SE (from serial number 33073/16.10)
- HABITAT 2 24 SE
How to choose the right product
To choose the correct rubber gasket, consider the following points:
- Check the inner and outer diameter of the gasket to ensure they meet your requirements.
- Make sure the thickness of the gasket is suitable for your boiler.
- Compare the part number (140003056) with the existing gasket or the documentation for your boiler.
- If in doubt, consult a specialist to confirm your choice.
Possible causes of failure and prevention methods
The main reasons a rubber gasket may fail include:
- Wear due to high temperatures and pressure.
- Chemical exposure from aggressive environments.
- Improper installation leading to damage.
To prevent wear, it is recommended to:
- Regularly check the condition of the gasket during boiler maintenance.
- Ensure the heating system operates within normal temperature and pressure ranges.
- Follow the manufacturer's instructions when installing the gasket.
Difficulty of part replacement
Replacing the rubber gasket does not require special skills and can be done independently. It typically takes about 30-60 minutes. Steps for replacement:
- Disconnect the boiler from the power supply and allow it to cool down.
- Remove the old gasket, carefully cleaning the installation area of any residue.
- Install the new gasket, ensuring it is positioned correctly.
- Reassemble all components and test the operation of the boiler.
Note that proper installation of the gasket is critical to preventing leaks and ensuring the long-lasting performance of your boiler.