|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Gasket for the secondary heat exchanger of the Nova Florida Libra Dual BTFS 32-AF boiler (6ORSCAPI00)
Description: The gasket for the secondary heat exchanger of the Nova Florida Libra Dual BTFS 32-AF boiler is designed to ensure the tightness of connections and prevent leaks. This part is essential for the proper operation of the boiler, as it helps maintain optimal temperature and heat exchange efficiency, which is critical for the functioning of the heating system.
Technical specifications:
| Specification | Value |
|---|---|
| Inner diameter | 18.5 mm |
| Outer diameter | 25.5 mm |
| Thickness | 3.5 mm |
Compatibility: This gasket is compatible with the Nova Florida Libra Dual BTFS 32-AF boiler, part number 6ORSCAPI00.
How to choose the right product:
When selecting a gasket for the heat exchanger, pay attention to the following parameters:
- Inner and outer diameter of the gasket.
- Thickness of the gasket.
- Compatibility with your boiler model.
Ensure that the gasket dimensions match the original part completely to avoid installation and operational issues with the boiler.
Possible causes of failure and prevention methods:
The gasket may fail for the following reasons:
- Wear due to high temperature and pressure.
- Mechanical damage during installation.
- Corrosion from exposure to antifreeze or other chemicals.
To prevent premature wear of the gasket, it is recommended to:
- Regularly check the condition of the gasket and all connections.
- Avoid overheating the boiler and using low-quality heat transfer fluids.
- Follow installation and replacement guidelines for parts.
Difficulty of part replacement:
Replacing the gasket is a moderately difficult task and can be accomplished by following these steps:
- Disconnect the boiler from electricity and allow it to cool down.
- Drain the heat transfer fluid from the system.
- Remove the heat exchanger casing, carefully detaching all fasteners.
- Replace the old gasket with a new one, ensuring it is installed correctly.
- Reassemble all components in reverse order and refill the system with heat transfer fluid.
If you lack experience, it is advisable to consult a professional to avoid damaging the equipment.