|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Agideli pump gasket, rubber
Description: The Agideli pump gasket is an essential component that ensures the tightness of connections in pumps. Made from high-quality rubber, it provides durability and reliability in operation. This gasket is suitable for various models of Agideli pumps, making it a versatile solution for repairing and maintaining your equipment.
Technical specifications:
| Parameter | Value |
|---|---|
| Compatibility | Agideli |
| Purpose | For pumps |
| Part type | Gasket |
| Inner diameter | 140 mm |
| Outer diameter | 150 mm |
| Thickness | 1.5 mm |
| Bolt holes | Ø 9 mm (x4) |
| Material | Rubber |
| Quantity | 1 |
| Country of manufacture | China |
Compatibility:
The gasket is compatible with Agideli pumps. Ensure that the sizes and specifications match to avoid potential installation issues.
How to choose the right gasket:
When selecting a gasket for your pump, pay attention to the following points:
- Compare the gasket diameters with the specifications of your pump.
- Ensure the presence of necessary bolt holes and their diameter.
- Check that the gasket material is suitable for the operating conditions (temperature, pressure).
Possible causes of failure:
The gasket may fail for the following reasons:
- Wear due to prolonged use.
- Damage from chemicals or high temperatures.
- Improper installation, which can lead to misalignment and leaks.
Methods to prevent damage:
To avoid gasket failure, follow these recommendations:
- Regularly check the condition of the gasket and replace it at the first signs of wear.
- Use the gasket only for its intended purpose.
- Ensure proper installation and tension of components to avoid misalignment.
Replacement recommendations:
- Disconnect the pump from the power source and drain the fluid from the system.
- Remove the old gasket and clean the surface of any remnants of the old material.
- Ensure that the gasket installation areas are clean and dry.
- Install the new gasket, ensuring it is properly positioned.
- Secure the pump, checking the reliability of the fastening.
- Turn on the pump and check for leaks.
Replacement difficulty:
Replacing the gasket for the Agideli pump has a medium level of difficulty and can be done independently with basic knowledge of pump operation. If you encounter difficulties, it is recommended to consult a specialist.