|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Pressure switch for dishwasher PSW503UN
Pressure switch (or water level sensor) for dishwashers PSW503UN is designed to monitor the water level in the units. It ensures the proper operation of the dishwasher, preventing overfilling or insufficient water, which can damage the appliance. This pressure switch has a diameter of 58 mm and operates at a power supply of 250V/16A.
Specifications
| Characteristic | Value |
|---|---|
| Diameter | 58 mm |
| Power supply | 250V/16A |
| Activation level | 55/30 |
Selection tips
When choosing a pressure switch for your dishwasher, it is important to pay attention to the following points:
- Device diameter: must match 58 mm.
- Power supply: ensure that the voltage and current are compatible with your model.
- Activation level: check that it matches the required parameters for your model.
Causes of malfunction and prevention
The pressure switch may fail for the following reasons:
- Contamination or blockage: can lead to incorrect water level readings.
- Wear of the diaphragm: over time, this can cause leaks and operational failures.
To prevent these issues, it is recommended to:
- Regularly clean the pressure switch from contaminants.
- Check and replace it at the first signs of wear.
Replacement difficulty
Replacing the PSW503UN pressure switch can be done independently but requires certain skills. The replacement process includes the following steps:
- Disconnect the dishwasher from the power supply.
- Drain the water from the machine.
- Remove the old pressure switch by disconnecting the hoses and electrical connections.
- Install the new pressure switch, reconnecting all hoses and wiring.
- Test the device before fully reassembling.
Difficulty level: medium. It is recommended to have the necessary tools on hand and follow the manufacturer's instructions.