|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Pump for steam generator 16W NME Type4 240V Delonghi ULKA (VT128304)
The pump for the steam generator with a power of 16 W and an operating voltage of 240 V is designed to ensure efficient water delivery in steam generators. This part is an excellent solution for those who repair steam generators or want to replace a faulty pump themselves. The NME Type4 model guarantees reliable operation and durability with proper use.
Technical specifications
| Parameter | Value |
|---|---|
| Power | 16 W |
| Operating voltage | 240 V |
| Type | NME 4 |
| Compatible models | 3020P, L100DB, PC800, PC800.1, PRO270, SV2100V, XLVAP/B, SV2000V |
How to choose the right part
When selecting a pump for your steam generator, pay attention to the following points:
- Power: Ensure that the power of your new pump matches the power of the original part (in this case, 16 W).
- Operating voltage: Choose pumps with an operating voltage of 240 V to avoid damaging the device.
- Type and model: Check the compatibility of the part with your steam generator model using the list of compatible models.
Possible causes of failure and prevention methods
Reasons why the pump may fail:
- Clogging: Accumulation of limescale and other contaminants can block the pump's operation. It is recommended to regularly clean the water tank.
- Overheating: Prolonged use at high temperatures can lead to overheating. Use the pump according to the manufacturer's recommendations.
- Wear: Damage to the internal parts of the pump over time leads to failure. Regularly checking the condition of the pump can help identify problems early.
Difficulty of part replacement
Replacing the pump for the steam generator is of medium difficulty. To successfully replace it, follow these steps:
- Turn off the steam generator and disconnect it from the power supply.
- Drain any remaining water from the tank.
- Remove the device cover to access the pump.
- Disconnect the old pump by removing the electrical connections and tubes.
- Install the new pump, connecting all necessary components.
- Close the cover and conduct a device test.
If you have experience in appliance repair, replacing the pump may take between 30 to 60 minutes.