|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Switch for oven and electric stove EGO 46.23866.500/RS/88
Model: EGO 46.23866.500/RS/88, 46.23866.862 Hansa (23866.500RS88)
The switch is designed to control the functions of ovens and electric stoves. It allows the user to select different operating modes of the device, providing convenience during cooking.
Technical specifications
| Voltage and load: | 250V~ 12A |
| Number of positions: | 6 (4+0+1 adjustment) |
| Number of contact rows: | 6 |
| Terminal size: | 6.3 mm |
| Body length: | (± 2 mm) 59 mm |
| Body width: | (± 2 mm) 50 mm |
| Shank length: | (± 2 mm) 23 mm |
| Shank diameter: | (± 0.1 mm) 6 mm |
| Diameter with flat: | (± 0.1 mm) 4.6 mm |
| Distance between mounting holes: | (± 2 mm) 29 mm |
| Mounting diameter: | M4 |
| Marking: | 46.23866.500 |
| Thermostat mounting: | Yes |
Compatibility with models
This switch is compatible with many Hansa models, including:
- Hansa 4CEW 53064
- Hansa 4GIEW 53052
- Hansa BOEI612000 16950
- Hansa E501.81 14026
- Hansa FCCW515364 15364
- and many others.
How to choose the right switch
When selecting a switch for your oven or electric stove, pay attention to the following points:
- Ensure that the switch model matches your device model.
- Check the technical specifications, such as voltage and number of positions.
- Compare dimensions, including shank length and diameter, to avoid mismatches.
Causes of failure and prevention methods
The main causes of switch failure may include:
- Contact wear due to frequent use.
- Moisture or dirt ingress, which can lead to short circuits.
To prevent wear, it is recommended to:
- Regularly clean the area around the switch.
- Avoid excessively frequent use of modes not intended by the manufacturer.
Difficulty of switch replacement
Replacing the switch is relatively simple and can be done independently. It is recommended to follow this step-by-step process:
- Disconnect the device from the power supply.
- Remove the control panel where the switch is installed.
- Disconnect the old switch, noting the wire locations.
- Install the new switch, connecting the wires in the same order.
- Close the control panel and reconnect the device to the power supply.
Switch replacement typically takes about 30 minutes and requires basic skills in working with electrical devices.