«Payment by installments» of monobank
payments
of $6.67
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Vibrating pump SKL Type EX5 - 48 W, 230 V
The SKL Type EX5 vibrating pump is designed for pumping water and other liquids in various home and commercial systems. This pump has a power rating of 48 W and operates at a voltage of 230 V, making it an ideal solution for tasks that require reliable and efficient performance. With a maximum working pressure of 15 bar and a high flow rate of 650 cm³/min, it is well-suited for use in irrigation systems, aquariums, and other applications where a stable liquid supply is necessary.
Technical specifications
| Parameter | Value |
|---|---|
| Power | 48 W |
| Voltage and frequency | ~230 V, 50 Hz |
| Maximum working pressure | 15 bar |
| Flow rate | 650 cm³/min |
| Dimensions | 55x55x124 mm |
| Outlet diameter | outer 14 mm, inner with thread 1/8" |
| Inlet fitting diameter | outer 7.2 mm |
| Information on the body | SKL Code: CFM302UN 48W 15bar 230V~50Hz Tf.35°C |
How to choose the right pump
When selecting the SKL Type EX5 vibrating pump, consider the following points:
- Power: Ensure that the pump has sufficient power for your needs.
- Working pressure: Check that the maximum working pressure meets the requirements of your system.
- Dimensions and connections: Make sure the pump's dimensions fit your space and that you can properly connect the pump to the system.
Possible causes of malfunctions and prevention methods
Malfunctions of the vibrating pump can be caused by:
- Overheating: Ensure adequate ventilation and avoid running the pump without liquid.
- Clogs: Regularly check the inlet and outlet openings for debris.
- Bearing wear: Monitor the condition of the pump and perform regular maintenance.
Difficulty of pump replacement
Replacing the vibrating pump is generally a moderately challenging task, especially for beginners. It is recommended to follow these steps:
- Disconnect the pump from the power supply.
- Drain any remaining liquid and disconnect all hoses.
- Remove the old pump by unscrewing the fasteners.
- Install the new pump following the installation instructions.
- Reconnect the hoses and check the tightness of the connections.
- Reconnect the pump to the power supply and test its operation.
By following these recommendations, you can successfully replace the pump and ensure its long-lasting and reliable operation.
