|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
EF144 filter set for Electrolux and AEG vacuum cleaners (2 pcs)
EF144 filter set is designed for use in vacuum cleaners from the brands Electrolux and AEG. The filters provide high-quality air filtration, preventing dust and allergens from re-entering the room. This set includes two filters, allowing you to have a spare on hand for replacement.
Technical specifications
| Article number | 900167152 |
|---|---|
| Type | Container cone filter |
| Compatibility | ZB5106, ZB6106, ZB5108, ZB6108, ZB5112, ZB6114, AG5106, AG6106, AG5112, ZB6118, CX7-45ANI and many other Electrolux and AEG models. |
How to choose the right filter
When selecting EF144 filters, pay attention to the following points:
- Compatibility: Ensure that the filters are suitable for your vacuum cleaner model. Compare the model numbers listed in the specifications with your device's number.
- Filter type: Make sure you are choosing a container cone filter, as other types may not fit.
- Quantity: It is recommended to have a spare filter to avoid downtime for your vacuum cleaner.
Possible causes of failure and prevention methods
The main causes of filter failure:
- Clogging: Dust and dirt can clog the filters, reducing their effectiveness. Regularly check and clean the filters.
- Wear: Over time, filters lose their filtration capability. It is recommended to replace filters every 6-12 months, depending on usage intensity.
To extend the life of the filters, follow these recommendations:
- Clean the filters of dust and dirt after each use.
- Store the vacuum cleaner in a dry and clean place to prevent moisture buildup.
Difficulty of filter replacement
Replacing the EF144 filter is a simple task that can be done independently. You will need to follow these steps:
- Disconnect the vacuum cleaner from the power supply.
- Open the filter cover, following the instructions in the vacuum cleaner manual.
- Remove the old filter.
- Install the new filter, ensuring it is securely in place.
- Close the filter cover and reconnect the vacuum cleaner to the power supply.
Difficulty rating: 1 out of 5. Replacing the filter does not require special skills and can be completed in a few minutes.