|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Vacuum motor WHICEPART 1200W (VC07W0292AQ)
The WHICEPART vacuum motor with a power of 1200 watts is ideal for replacement in various vacuum models. It is important to note that this motor is universal, allowing it to be used in devices from different brands. It is designed to ensure reliable vacuum operation and effective suction, making it an excellent choice for professional repair technicians and DIY enthusiasts.
Technical specifications
| Specification | Value |
|---|---|
| Overall motor height | 105 mm |
| Turbine diameter | 108 mm |
| Brush extension | 108 mm |
| Skirt height | 26 mm |
| Turbine housing | Without ribs |
| Motor part diameter | 71 mm |
| Power | 1200 watts |
How to choose the right motor
When selecting a motor for your vacuum, pay attention to the following parameters:
- Motor height: Ensure that the height of the new motor matches the original.
- Turbine diameter: This parameter should match the diameter installed in your vacuum.
- Skirt height: Check that the skirt height of the new motor corresponds to the original.
- Power: It is recommended to choose a motor with the same power to avoid disrupting the device's operation.
Possible causes of failure and prevention methods
The vacuum motor may fail for several reasons:
- Clogged filters: Regularly clean and replace filters to prevent overheating and damage to the motor.
- Vacuum overload: Do not overload the vacuum to avoid damaging the motor.
- Wiring issues: Check wiring and connectors for damage.
To extend the motor's lifespan, follow the vacuum maintenance recommendations and perform regular servicing.
Difficulty of motor replacement
Replacing the vacuum motor is not too difficult if you follow step-by-step instructions:
- Disconnect the vacuum from the power supply.
- Remove the vacuum casing to access the motor.
- Disconnect the wiring from the old motor.
- Remove the old motor and install the new one, ensuring correct positioning.
- Reconnect the wiring to the new motor.
- Reassemble the vacuum casing.
- Turn on the vacuum and check its operation.
The difficulty level of the replacement may vary from moderate to high depending on the vacuum's design, but in most cases, it can be done independently with minimal skills.