|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Motor for extractor fan Gefest GF-58/T16 (58/T16)
Description: The motor for the Gefest GF-58/T16 extractor fan is designed to ensure the efficient operation of ventilation systems installed in kitchens and industrial spaces. This component guarantees reliable removal of smoke, steam, and odors, creating a comfortable atmosphere for cooking.
Technical specifications:
| Parameter | Value |
|---|---|
| Model | GF-58/T16 |
| Type | Electric motor |
| Voltage | 220 V |
| Power | 150 W |
| Rotation speed | 2800 RPM |
| Dimensions | 120 x 100 x 80 mm |
Compatibility:
The motor is compatible with Gefest extractor fans models GF-58 and 58/T16. It is recommended to check that the model number matches the specified one before purchasing.
How to choose the right part:
- Check the model number of the extractor fan to ensure compatibility.
- Compare the technical specifications with the original part.
- Pay attention to the appearance of the motor; the absence of damage and corrosion are important factors.
Causes of motor failure:
- Overheating due to prolonged operation at maximum power.
- Foreign objects entering the motor.
- Improper installation or inadequate mounting.
Methods to prevent failures:
- Regularly clean the extractor fan from grease and dirt.
- Avoid overloading the extractor fan with prolonged operation at maximum power.
- Ensure the ventilation ducts are in good condition.
Recommendations for motor replacement:
- Disconnect the extractor fan from the power supply.
- Remove the protective cover and filters.
- Unscrew the mounting screws holding the motor in place.
- Disconnect the electrical connections.
- Install the new motor, connect the wires, and secure it in place.
- Reinstall the filters and protective cover.
- Reconnect the extractor fan to the power supply and check its operation.
Assessment of replacement difficulty:
Replacing the motor of the Gefest GF-58/T16 extractor fan has a medium level of difficulty. Basic skills in working with electrical appliances and tools are required. If you lack experience, it is recommended to consult a specialist.