|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Control module for Electrolux dishwasher (4055395059)
Product description: The control module (without firmware) for Electrolux dishwashers is a key component responsible for managing all functions of the device. It ensures the sequential execution of washing programs, controls temperature and time, and interacts with other elements of the appliance. This module is compatible with a wide range of models, making it a versatile solution for repairs and replacements.
Technical specifications and compatibility
| Manufacturer | Model |
|---|---|
| Arthurmartinelux | ASI64031X, ASI64041X, ASI64060K, ASI64060W, ASI64060X |
| Electro Helios | DI9125, DI9125X, DI9126, DI9126X |
| Electrolux | ESF6202LOW, ESF6212LOX, ESF64075W, ESF64075X, ESF65030W, ESF65030X, ESF65031W, ESF65040W, ESF65040X, ESF65042W, ESF65045W, ESF65045X, ESF65047W, ESF65049W, ESF65049X, ESF65050S, ESF65050W, ESF65050X, ESF65052W, ESF65053W, ESF65055X, ESF65060S, ESF65060W, ESF65068S, ESI64030X, ESI64041K, ESI64041W, ESI64041X, ESI64042K, ESI64042W, ESI64042X, ESI64052K, ESI64052W, ESI64052X, ESI64060K, ESI64060W, ESI64060X, ESI64075X, ESI64080K, ESI64080W, ESI64080X, ZDF3013, ZDF3023X, ESI44030X |
| Faure | FDF3010, FDF3013, FDF3015, FDF3017, FDF3018, FDF3018X, FDF3020, FDF3020S, FDF3023, FDF3023N, FDF3023S, ZDF3023SJuno |
| Rex Electrolux | RSF6201LOS, RSF6201LOW, RSF6201LOX, RSF6214LOW, RSF64075W, RSF64075X, RSF65040S, RSF65040W, RSF65040X |
| Zanussi | ZDF1001, ZDF2021, ZDF3010, ZDF3010X, ZDF3011, ZDF3011X, ZDF3012, ZDF3012X, ZDF3013X, ZDF3014, ZDF3014X, ZDF3015, ZDF3015X, ZDF3016, ZDF3016X, ZDF3020, ZDF3020N, ZDF3020S, ZDF3020X, ZDF3023, ZDF3023N, ZDF3023S, ZDF312, ZDF3013, ZDF3023X |
| Nordland | VW1013 |
| Rosenlew | RW5540, RW5540X, RW5550, RW5550X |
| Zanker | ZKS44010X, ZKS64010X |
How to choose the right product
When selecting a control module for your dishwasher, consider the following aspects:
- Model compatibility: Ensure that your machine's model number matches those listed in the table.
- Firmware availability: This module is supplied without firmware, which means it may require configuration or programming depending on your model.
Possible causes of malfunction and prevention methods
The control module may fail for several reasons:
- Overheating: Frequent overheating can damage electronic components. Ensure that the appliance's ventilation is not blocked.
- Moisture: Water exposure to the module can cause short circuits. Regularly check for seals and leaks.
- Power issues: Unstable voltage can lead to operational failures. Use voltage stabilizers for protection.
Difficulty of part replacement
Replacing the control module can be done even by a beginner, but it requires some skills. Here is a step-by-step guide:
- Disconnect the dishwasher from the power supply.
- Remove the back panel to access the control module.
- Disconnect the old module, noting the order of the wire connections.
- Install the new module and connect it according to your notes.
- Close the panel and reconnect the appliance to the power supply.
Difficulty rating: Moderate, basic electronics skills are recommended.