|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Interior lighting bulb for refrigerator 40W Whirlpool (481213428078)
Original bulb for Whirlpool refrigerator 40W, made from high-quality materials, provides reliable and long-lasting lighting for the interior of your refrigerator. This bulb ensures good visibility, making it easier to find products and keep your refrigerator organized.
Specifications
| Parameter | Value |
|---|---|
| Power | 40W |
| Diameter | Ø25 mm |
| Length | 93 mm |
Compatibility with models
This bulb is compatible with various refrigerator models, including:
- Whirlpool: S20D TSB33-A/G, S20B RBB20-A/G, WSF6222 A+S, S20D FBB20-A/G, and many others.
- BAUKNECHT: KSN 581 A++ IN, KSN 560/1 A+ ES, KSN 570 A+ ES, and others.
- Hotpoint: MSZ 910 NDF (UK), MSZ 912 NDF (UK), MSZ 900 NDF (UK), and others.
- Hotpoint-Ariston: MSZ 922 NDF/HA, MSZ 926 NDF/HA, MSZ 802 D(EX)/HA 53497, and others.
How to choose the right product
When selecting a bulb, ensure you check the following parameters:
- Power: make sure the bulb matches the power specified in your refrigerator.
- Dimensions: verify that the size (diameter and length) matches the old bulb.
- Compatibility: refer to the list of compatible models to avoid mistakes.
Possible causes of failure and prevention methods
The bulb may fail due to the following reasons:
- Frequent on and off cycles can lead to overheating and rapid wear.
- Improper installation can cause mechanical damage.
To prevent premature failure, monitor voltage stability and avoid sharp temperature fluctuations inside the refrigerator.
Difficulty of replacement
Replacing the bulb in the refrigerator is a relatively simple task that can be done by yourself. Here are the steps to follow:
- Unplug the refrigerator from the power source.
- Locate the bulb installation area, usually at the top of the interior space.
- Remove the old bulb by gently turning it counterclockwise.
- Install the new bulb by turning it clockwise until it is secure.
- Plug the refrigerator back in and check the operation of the new bulb.
Replacing the bulb typically takes no more than 10 minutes and does not require specialized tools.