|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Oven bulb assembly 25W 230V E14 Electrolux (3879113946)
Product description: The oven bulb assembly with a power of 25W and a voltage of 230V featuring an E14 base is designed to replace burnt-out bulbs in ovens. This part provides essential lighting inside the oven, allowing you to monitor the cooking process. It is compatible with various models of household ovens, ensuring reliable performance and durability.
Technical specifications and compatibility
| Specification | Value |
|---|---|
| Power | 25W |
| Voltage | 230V |
| Base type | E14 |
Compatible models:
- Arthurmartinelux: AOB98000X, AOB98000XASR80220817
- AEG: B 8920-M, B8920-1-A, B8920-1-M, B8924-M, B9820 and others
- Therma: BO D.2 ST CN, BO D.2 ST SW and others
- Electrolux: EB SL7 GTC.3, EBGL7 CN and others
- Juno: JEB 980E, JEB98601A and others
- Husqvarna Electrolux: QCE 541, QCE742-1-A and others
- John Lewis: JLBIOS610
How to choose the right product
When selecting an oven bulb assembly, pay attention to the following points:
- Power – ensure it is 25W.
- Voltage – check that it is 230V.
- Base type – it must be E14.
- Compatibility with your oven model – refer to the compatibility table.
Causes of failure and prevention methods
The oven bulb may fail for the following reasons:
- Frequent heating and cooling cycles can lead to overheating and rapid wear.
- Improper installation may cause damage to the base.
- Using bulbs not designed for ovens can result in breakage.
To prevent wear, it is recommended to:
- Use only specialized bulbs for ovens.
- Regularly check the condition of the bulb and replace it if necessary.
- Ensure the bulb is properly installed and secured.
Difficulty of replacement
Replacing the bulb in the oven is a relatively simple procedure that can be done by yourself. Follow these steps:
- Disconnect the oven from the power supply for safety.
- Allow the oven to cool down if it has been used recently.
- Remove the glass cover, if applicable.
- Unscrew or pull out the old bulb.
- Install the new bulb by carefully screwing it in until secure.
- Replace the cover and reconnect the oven to the power supply.
The difficulty of replacement can be rated as low, and it does not require special tools.