|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Philips 10019067 bulb for extractor hood (E14, 40W)
The Philips 10019067 bulb is designed for use in kitchen extractor hoods. This 40W incandescent bulb with an E14 base provides bright lighting and effectively illuminates the area above the stove, enhancing visibility while cooking. Standard dimensions of 25*82 mm make it compatible with most extractor hoods.
Technical specifications
| Parameter | Value |
|---|---|
| Application | For kitchen extractor hoods |
| Type | Incandescent bulb |
| Power | 40 W |
| Voltage | 230 V |
| Base type | E14 SES |
| Bulb shape | Special |
| Color temperature | 2700 K |
| Luminous flux | 420 Lm |
| Dimensions | 25*82 mm |
| Bulb lifespan | 1000 h |
| Country of manufacture | Netherlands |
How to choose the right product
When selecting a bulb for your extractor hood, consider the following points:
- Base type: Ensure that the product you choose has an E14 base that matches your extractor hood.
- Power: Select the appropriate wattage based on the size of the extractor hood and your brightness preferences.
- Bulb shape: Pay attention to the bulb shape to ensure it fits your model of extractor hood.
Possible causes of failure and prevention methods
The Philips 10019067 bulb may fail for the following reasons:
- Overheating: Ensure that the ventilation in the extractor hood is functioning properly to avoid overheating the bulb.
- Frequent on/off cycles: Try to avoid frequently switching the bulb on and off, as this can shorten its lifespan.
- Incorrect wattage selection: Using a bulb with a wattage higher than recommended can lead to overheating and failure.
To prevent premature failure of the bulb, we recommend periodically checking the condition of the extractor hood and monitoring its performance.
Difficulty of bulb replacement
Replacing the bulb in the Philips 10019067 extractor hood is a straightforward procedure that can be done by yourself. Follow these steps:
- Disconnect the extractor hood from the power supply for safety.
- Remove the old bulb by gently turning it counterclockwise.
- Install the new bulb by turning it clockwise until securely in place.
- Reconnect the extractor hood and check the operation of the new bulb.
The bulb replacement process usually takes less than 10 minutes and does not require special tools.