|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Oven bulb LMP-005 25W E14
The LMP-005 oven bulb with a power of 25W and E14 base is designed to illuminate the interior of ovens. This bulb operates at a voltage of 220V and is an essential component for ensuring visibility while cooking. Its compact dimensions (diameter 22mm and length 48mm) allow for easy installation and replacement in most oven models.
Technical specifications and compatibility
| Specification | Value |
|---|---|
| Power | 25W |
| Voltage | 220V |
| Diameter | 22mm |
| Length | 48mm |
| Base | E14 |
This bulb is compatible with most oven models that use an E14 base. Before purchasing, ensure that your model requires a bulb with these specifications.
How to choose the right product
When selecting an oven bulb, pay attention to the following points:
- Base type - ensure it matches your oven (E14).
- Power - check that 25W is suitable for your model and does not exceed the allowable parameters.
- Dimensions - ensure that the diameter and length of the bulb fit your device.
Possible causes of failure and prevention methods
Bulb failures can be caused by the following factors:
- Frequent on and off cycles - sudden temperature changes can shorten the bulb's lifespan.
- Using bulbs with incorrect power - this can lead to overheating and failure.
- Contamination or damage to the base - this can cause poor contact and breakage.
To prevent wear, it is recommended to:
- Regularly check the condition of the bulb.
- Use bulbs with the recommended power.
- Clean the base and installation area from dirt.
Difficulty of part replacement
Replacing the LMP-005 oven bulb is a simple procedure that can be done by yourself. To replace it, follow these steps:
- Disconnect the oven from the power supply.
- Wait for the bulb to cool down.
- Unscrew the protective cover (if available).
- Remove the old bulb by gently turning it counterclockwise.
- Install the new bulb by turning it clockwise.
- Close the protective cover and reconnect the oven to the power supply.
The difficulty of replacement can be rated as low, and it does not require special skills or tools.