|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
White steel cover for Gefest GF-273 stove (1200.00.0.007)
The white steel cover for the Gefest GF-273 stove (part number 1200.00.0.007) is designed to replace a worn or damaged cover on Gefest brand stoves. This cover protects the internal components of the stove from dirt and mechanical damage, while also enhancing the aesthetic appearance of the appliance. It is compatible with models 1200, 6100, and 6300.
Technical specifications
| Parameter | Value |
|---|---|
| Width | 597 mm |
| Height | 558 mm |
| Distance between mounting holes | 550 mm |
| Compatible models | Gefest 1200, 6100, 6300 |
How to choose the right cover
When selecting a cover for your Gefest stove, pay attention to the following points:
- Compatibility with your stove model. Ensure that the part number and dimensions meet your requirements.
- Check the condition of the mounting holes. Make sure the distance between the holes matches the specified distance (550 mm).
- Material and color. Choose a cover that matches the original design of your stove.
Possible causes of failure and prevention methods
The stove cover may fail for the following reasons:
- Mechanical damage: Impacts or falls can cause deformities. To avoid this, handle the stove carefully.
- Corrosion: Prolonged exposure to moisture can lead to rust. Regularly clean the cover and avoid contact with water.
- Improper installation: If the cover is installed incorrectly, it can lead to additional stress. Ensure proper installation when replacing.
Difficulty of cover replacement
Replacing the cover on a Gefest stove is a moderately complex task and can be done independently. Follow this step-by-step guide:
- Disconnect the stove from the power supply.
- Remove the old cover by unscrewing the mounting screws.
- Ensure that the stove surface is clean and undamaged.
- Install the new cover, aligning the mounting holes with the screws.
- Secure the cover with screws, being careful not to overtighten and damage the material.
- Check that the cover is securely fastened and has no play.
On average, replacing this part can take between 30 to 60 minutes, depending on your experience and tools.