|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Fan blade for Gorenje extractor
Description: Fan blade for extractor with a diameter of 150 mm and a height of 131 mm, shaft diameter of 6 mm, rotating counterclockwise and installed under a nut. This component, made in black, is perfect for various Gorenje extractor models, ensuring effective removal of air and odors from the kitchen.
Technical specifications
| Parameter | Value |
|---|---|
| Fan blade diameter | 150 mm |
| Fan blade height | 131 mm |
| Shaft diameter | 6 mm |
| Rotation direction | Counterclockwise |
| Material | Plastic |
Compatibility
This fan blade is compatible with the following Gorenje extractor models:
- IHT961S2X-BR
- IHT961S2X-SA
- WHT661S2X-SA
- WHT931E2X-SA
- WHT941A2XBG-SA
- WHT961S2X-SA
- OK634X
- AR62E
- DK2000P2
- DK2000P2B
- DK9715AL
- DK9715E
- DK9P2T
- DK9P2X
- DKG552-ORA-S
- DKG6415X
- DKG902ORA-E
How to choose the right fan blade
When selecting a fan blade, consider the following points:
- Dimensions: Ensure that the diameter and height of the fan blade meet your requirements.
- Compatibility: Check your extractor model and ensure it is listed among the compatible models.
- Rotation direction: Make sure the rotation direction matches the requirements of your device.
Causes of failure and prevention
The main causes of fan blade failure:
- Clogging: Accumulation of grease and dust can lead to overheating and failure.
- Mechanical damage: Impacts and falls can cause cracks and deformation.
To prevent failure:
- Regularly clean the extractor from contaminants.
- Avoid strong impacts and falls on the fan blade.
Replacement recommendations
Replacing the fan blade is quite simple and can be done by yourself. Follow these steps:
- Disconnect the extractor from the power supply.
- Remove the extractor cover if necessary.
- Unscrew the old fan blade (if there is a nut, use the appropriate tool).
- Install the new fan blade onto the shaft, ensuring it is properly secured.
- Secure the nut or other fastening component.
- Check that the fan blade rotates freely.
- Replace the cover and reconnect the extractor to the power supply.
Replacement difficulty
Replacing this fan blade has a low level of difficulty and can be performed even by a beginner if the instructions are followed. However, if you have any doubts, it is recommended to consult a professional technician.