|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Flat impeller for pump BЦH 1.6, d=130 mm
The impeller for the BЦH 1.6 pump is a reliable and high-quality component designed to ensure the efficient operation of pumps. With it, you can easily replace a worn or damaged part, restoring the functionality of your equipment.
Specifications
| Parameter | Value |
|---|---|
| Compatibility | BЦH 1.6 |
| Purpose | For pumps |
| Part type | Spare parts |
| Impeller type | Closed |
| Outer diameter | 130 mm |
| Total height | 35 mm |
| Impeller thickness | 12.5 mm |
| Working gap height | 6 mm |
| Mounting | Hole Ø 12.5 mm + M10 nut thread |
| Base diameter | 22 mm |
| Base height | 4 mm |
| Inlet pipe diameter (inner/outer) | 34/39 mm |
| Inlet pipe height | 10 mm |
| Material | Aluminum alloy |
| Quantity per unit | 1 |
| Country of manufacture | Ukraine |
| Additional characteristics | Impeller with a blind M10 nut. Used seal 301-12 |
Compatibility
This impeller is compatible with BЦH 1.6 pumps. When selecting a spare part, it is important to consider not only the model but also the technical parameters to avoid mismatches.
How to choose the right part
When selecting an impeller, pay attention to the following points:
- Pump model: Ensure that your pump model matches the specified compatibility.
- Dimensions: Check the diameter and height of the impeller to ensure they match the original specifications.
- Material: Choose parts made from quality materials to increase lifespan.
Causes of failure and prevention
Impellers can fail for several reasons:
- Wear: Regular use can lead to natural wear of the material.
- Clogging: Foreign objects or dirt can damage the working elements.
- Improper installation: If the impeller is installed incorrectly, it may become deformed.
To prevent failures, keep the equipment clean and pay attention to sounds that may indicate malfunctions.
Replacement recommendations
- Disconnect the pump from the power supply.
- Remove the old impeller by carefully unscrewing the nut.
- Clean the installation area from dirt and remnants of the old part.
- Install the new impeller, ensuring proper seating.
- Secure the impeller with the nut, avoiding over-tightening.
- Reconnect the pump and check its operation.
Replacement difficulty
Replacing the impeller has a medium level of difficulty and can be done independently with basic tool skills. It is recommended to follow the instructions and seek assistance from a specialist if necessary.