|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Flat impeller for pump BCН 1.2, d=130 mm
Description: The impeller for the BCН 1.2 pump is a key component that ensures the efficient operation of your pump. With a diameter of 130 mm and a closed impeller design, this part is made from high-quality aluminum alloy, providing durability and reliability in operation. Installing this impeller will restore your pump's functionality and help you avoid costly repairs.
Technical specifications
| Parameter | Value |
|---|---|
| Compatibility | BCН 1.2 |
| Purpose | For pumps |
| Type of spare part | Pump spare part |
| Type of impellers | Closed |
| Outer diameter | 130 mm |
| Total height | 35 mm |
| Impeller thickness | 10.5 mm |
| Working gap height | 4 mm |
| Mounting | Hole Ø 12 mm + M10 nut thread |
| Base diameter | 22 mm |
| Base height | 4 mm |
| Inlet pipe diameter (inner/outer) | 34/39 mm |
| Inlet pipe height | 10 mm |
| Material | Aluminum alloy |
| Quantity | 1 |
| Country of manufacture | Ukraine |
| Additional characteristics | Impeller with a blind M10 nut. Used seal 301-12 |
How to choose the right impeller
When selecting an impeller for your pump, pay attention to the following points:
- Compatibility: Ensure that the impeller model is suitable for your pump. In this case, check that your pump is BCН 1.2.
- Dimensions: Compare the diameter and other dimensions of the impeller with the original part to avoid mismatches.
- Material: Prefer parts made from quality materials, such as aluminum alloy, to increase service life.
Causes of failure and prevention
Possible causes of failure:
- Wear and aging of the material.
- Entry of foreign objects into the pump.
- Incorrect installation or use of incompatible parts.
Prevention methods:
- Regularly check the pump for foreign objects.
- Monitor the condition of the seal and replace it as needed.
- Properly install and maintain the pump.
Recommendations for replacing the impeller
- Disconnect the pump from the power source and water supply.
- Remove the protective cover and unscrew the nuts holding the old impeller.
- Remove the old impeller and clean the installation area from contaminants.
- Install the new impeller, ensuring correct orientation and fit.
- Screw on the nut and replace the protective cover.
- Reconnect the pump and check its operation.
Difficulty of replacement
Replacing the impeller for the BCН 1.2 pump is of medium difficulty. If you have basic tool skills and an understanding of the pump's structure, you should be able to perform this replacement yourself.