|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Compressor for refrigerator Secop (NLE15KTK.2)
The Secop NLE15KTK.2 compressor is designed for use in refrigeration systems. It provides efficient cooling and is used in low-temperature applications. This hermetic piston compressor is ideal for freezers operating with refrigerant R600a.
Technical specifications
| Parameter | Value |
|---|---|
| Cylinder volume | 14.65 cm³ |
| Refrigerant | R600a |
| Application | Low temperature (LBP) |
| Cooling capacity (LBP, -25°C / 55°C) | 190 W |
| COP (LBP, -25°C / 55°C) | 1.19 |
| Cooling capacity (MBP, -10°C / 55°C) | 395 W |
| COP (MBP, -10°C / 55°C) | 1.72 |
| HP | 1/4 |
| Voltage/Frequency | 187-254V 50Hz 1~ |
| Compressor type | Hermetic piston |
| Height | 203 mm |
| Suction | 1/4" (6.35 mm) |
| Discharge | 1/4" (6.35 mm) |
| Compressor cooling | Passive cooling is usually sufficient |
| For equipment | Freezers |
How to choose the right product
When selecting a compressor, pay attention to the following parameters:
- Type of refrigerant: Ensure that the compressor is compatible with refrigerant R600a.
- Power: Check the required cooling capacity based on your freezer's specifications.
- Voltage and frequency: Make sure the voltage and frequency parameters match your operating conditions.
Possible causes of failure and prevention methods
The main reasons for compressor failure may include:
- Overheating: Ensure adequate ventilation to prevent overheating.
- Oil shortage: Regularly check the oil level in the system.
- Blockages in the system: Perform preventive maintenance to avoid blockages in the pipes.
Difficulty of part replacement
Replacing the compressor requires certain skills and tools. To perform the replacement, follow these steps:
- Disconnect the power to the freezer.
- Drain the refrigerant from the system using specialized equipment.
- Remove the old compressor by disconnecting the pipes and electrical connections.
- Install the new compressor following the manufacturer's instructions.
- Start the system and check for leaks.
The difficulty of replacement can be assessed as moderate, and it is recommended to consult a professional if you do not have experience working with refrigeration systems.