|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Compressor for refrigerator EMBRACO EMT56CLP 1/6 HP R600a 155W
Compressor type: reciprocating
Temperature range: low-temperature
Cooling capacity: up to 280 W depending on temperature
Technical specifications
| Parameter | Value |
|---|---|
| Refrigerant | R600 |
| Power supply voltage | 220-240V / 50Hz / 1~ |
| Motor type | RSIR |
| Oil charge volume | 180 cm³ |
| Oil type | AB 5 |
| Cylinder volume | 9.04 cm³ |
| Dimensions (LxWxH) | 228 x 155 x 166 mm |
| Weight | 7.5 kg |
| Inlet pipe diameter | 6.1 mm |
| Discharge pipe diameter | 4.94 mm |
How to choose the right compressor
When selecting a compressor for your refrigerator, pay attention to the following parameters:
- Model and specifications: Ensure that the compressor model matches your refrigerator in all specifications.
- Type of refrigerant: Check that your refrigerator uses R600 refrigerant to avoid incompatibility.
- Electrical specifications: Verify the voltage and frequency to prevent equipment overload.
Causes of failure and prevention methods
The compressor may fail for the following reasons:
- Overheating: Ensure good ventilation and cleanliness of the radiator.
- Insufficient oil: Regularly check the oil level and replace it as needed.
- Electrical malfunction: Monitor the condition of wires and connections.
Difficulty of replacement
Replacing the compressor can vary in difficulty depending on the technician's experience and the refrigerator's design. Generally, the process includes the following steps:
- Disconnect the refrigerator from the power supply.
- Drain the refrigerant (it is recommended to do this professionally).
- Remove the old compressor by disconnecting all pipes and fasteners.
- Install the new compressor by connecting the pipes and wires.
- Recharge the system with refrigerant and check the operation of the new compressor.
For inexperienced users, replacement can be challenging, so it is advisable to consult a professional.