|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Injector kit for liquefied gas for Gefest stove 1200.98.0.000-02 GF-205
The injector kit is designed to replace nozzles on Gefest gas stoves operating on liquefied gas. These nozzles ensure optimal gas combustion, guaranteeing efficient operation of your stove. It includes nozzles for various burners: large, medium, and small, as well as for the main oven burner.
Technical specifications and compatibility
| Injector name | Part number | Quantity | For burner |
|---|---|---|---|
| Large burner nozzle | 1200.00.0.053-04 | 1 pc. | #92 |
| Medium burner nozzle | 1200.00.0.053-02 | 2 pcs. | #75 |
| Small burner nozzle | 1200.00.0.053-10 | 1 pc. | #46 |
| Main oven burner nozzle | 1200.00.0.053-11 | 1 pc. | #87 |
How to choose the right product
When selecting injector kits for your gas stove, pay attention to the following points:
- Compatibility with your stove model. Ensure that the specified part numbers match your Gefest model.
- The type of gas you are using. This kit is suitable only for liquefied gas.
- The required number of nozzles for each burner. Make sure the kit contains all necessary components.
Possible causes of failure and prevention methods
Nozzles may fail for the following reasons:
- Clogging of nozzles due to the accumulation of grease and food. Regularly clean the nozzles from contaminants.
- Corrosion due to moisture exposure. Store the stove in a dry place and check the tightness of connections.
- Improper installation or use. Follow the installation and operation instructions for the stove.
Difficulty of part replacement
Replacing the injectors is a relatively simple procedure that even a beginner can perform. To replace, follow these steps:
- Disconnect the stove from the gas supply and electricity.
- Remove the old nozzles by unscrewing them with a screwdriver or wrench.
- Install the new nozzles, ensuring they fit snugly and are installed in the correct order.
- Check all connections for gas leaks before turning on the stove.
Difficulty rating: 2 out of 5. Basic tool handling skills are required.