|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Output filter set (HEPA12) FC8044/01 for Philips vacuum cleaners
Output filter (HEPA12) FC8044/01 is designed for use with Philips vacuum cleaners. This is an original filter that provides a high level of air purification, capturing up to 99.5% of dust particles and allergens, which is especially important for individuals with allergies or asthma. Installing this filter helps improve the air quality in your home and extends the lifespan of your vacuum cleaner.
Specifications and compatibility
| Filter model | FC8044/01 |
|---|---|
| Filter type | HEPA12 |
| Compatible vacuum models | CP0333/01, FC8044/01, FC8044/02, FC8408/01, FC8408/02, FC8428/02, FC8429/02, FC8436/02, FC8436/03, FC8438/02, FC8600/01, FC8601/01, FC8601/02, FC8601/03, FC8601/04, FC8601/05, FC8602/01, FC8602/02, FC8603/82, FC8604/01, FC8606/01, FC8606/02, FC8606/03, FC8607/01, FC8608/01, FC8608/02, FC8608/03, FC8608/04, FC8608/05, FC8610/01, FC8611/01, FC8611/02, FC8612/01, FC8612/02, FC8613/01, FC8613/02, FC8614/01, FC8614/02, FC8615/01, FC8615/02, FC8615/03, FC8617/01, FC8617/02, FC8619/01, FC8714/01, FC8714/02, FC8716/01, FC8716/02, FC8716/04, FC8720/01, FC8722/01, FC8724/01, FC8732/01, FC8733/01, FC8734/01, FC8734/02, FC8734/03, FC8734/71, FC8736/01, FC8738/01, FC8740/01, FC8740/02, FC8748/01, FC8913/01, FC8915/01, FC8915/02, FC8915/03, HR6969/01, HR6992/01, HR6993/01, HR6994/01, HR8501/01, HR8502/01, HR8502/06, HR8503/01, HR8504/01, HR8505/01, HR8507/02, HR8507/09, HR8508/02, HR8508/16, HR8508/19, HR8542/01, HR8564/01, HR8564/11, HR8564/91, HR8565/01, HR8565/02, HR8565/11, HR8565/12, HR8565/17, HR8566/01, HR8566/02, HR8566/05, HR8566/11, HR8566/12, HR8566/15, HR8566/19, HR8567/01, HR8567/02, HR8567/04, HR8567/09, HR8567/11, HR8567/12, HR8568/01, HR8568/02, HR8568/04, HR8568/09, HR8568/11, HR8568/12, HR8568/18, HR8568/19, HR8569/12, HR8569/17, HR8569/18, HR8570/12, HR8570/15, HR8570/38, HR8570/57, HR8571/15, HR8571/18, HR8572/11, HR8572/12, HR8572/18, HR8572/24, HR8572/28, HR8572/34, HR8573/12, HR8581/04, HR8581/10, HR8581/11, HR8582/14, HR8707/05, HR8731/01, HR8731/02, HR8731/05, HR8733/05, HR8735/01, HR8735/02, HR8755/02, HR8755/04, HR8775/05, HR8825/02, HR8837/02, HR8847/01, HR8858/02, HR8880/01, HR8881/02, HR8882/02, HR8884/01, HR8891/06, HR8891/16, HR8893/02, HR8893/06, HR8893/15, HR8897/02, HR8897/03, HR8897/04, HR8897/06, HR8898/06, HR8899/01, HR8900/12, HR8900/14, HR8900/15, HR8901/09, HR8903/09, HR8910/09, HR8910/12, HR8910/15, HR8948/01, HR8948/09, HR8981/18, HR8982/15 |
How to choose the right product
When selecting an output filter for your vacuum cleaner, it is important to pay attention to the following points:
- Compatibility: Ensure that the filter is suitable for your vacuum model. Check the model number and match it with the list of compatible models.
- Filter type: Make sure you are choosing a HEPA12 filter, as it provides a high level of filtration.
Possible causes of failure and prevention methods
The main reasons for filter failure include:
- Clogging: If the filter is used for too long without replacement, it can become clogged with dust and debris, reducing its effectiveness.
- Damage: Filters can be damaged due to improper installation or mechanical impact.
To prevent premature filter failure, it is recommended to:
- Regularly check and replace the filter every 6-12 months as needed.
- Follow the instructions for installing and removing the filter.
Difficulty of part replacement
Replacing the output filter is a simple procedure that can be done by yourself. You will need the following:
- Unplug the vacuum cleaner from the power source.
- Open the filter compartment cover.
- Remove the old filter.
- Install the new filter, ensuring it is properly seated.
- Close the filter compartment cover.
Overall, replacing the filter is a moderately easy task and does not require special tools.