|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Karcher abrasive blasting kit (2.638-792.0)
The Karcher abrasive blasting kit is designed for effective removal of rust, old paint, and stubborn dirt using Kärcher abrasive media. This set is compatible with Karcher household high-pressure cleaners from series K2 to K7 and significantly enhances cleaning results, allowing for a quality and quick effect.
Specifications
| Parameter | Value |
|---|---|
| Weight (kg) | 1.15 |
| Weight with packaging (kg) | 1.304 |
| Dimensions (L x W x H) (mm) | 525 x 110 x 100 |
Choosing components tips
When selecting the Karcher abrasive blasting kit, pay attention to compatibility with your device. Ensure that your device belongs to one of the K2 to K7 series. Also, check for the necessary abrasive media that may be required for use with the kit. It is important to consider the maximum working parameters of your device and their compliance with the specifications of this kit.
Causes of failure and prevention methods
The kit may fail for several reasons, including improper use, application of unsuitable abrasives, or lack of maintenance for the equipment. To prevent wear, always use the recommended abrasive media and keep the high-pressure cleaner clean. Regularly checking components and following the manufacturer's recommendations will help avoid premature breakdowns.
Replacement difficulty
Replacing components for the Karcher abrasive blasting kit does not require special skills and can be done independently. It is recommended to follow these instructions:
- Disconnect the device from the power supply and water.
- Remove the old nozzle (if installed).
- Install the new kit, following the instructions in the user manual.
- Check the installation for correctness and reconnect the device.
The difficulty of replacement is rated as low, and it can be handled by any user with basic tool skills.