|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Safety valve 8.5BAR 1/2" for Ariston water heater (571730)
Maximum pressure: 8.5 Bar
Thread diameter: 1/2"
Description
This safety valve is designed for use in Ariston water heaters, providing reliable protection against excessive pressure. It automatically releases excess pressure, helping to prevent equipment damage and ensuring a long lifespan for your water heater.
Specifications
| Feature | Value |
|---|---|
| Maximum pressure | 8.5 Bar |
| Thread diameter | 1/2" |
Compatibility
The valve is compatible with the following water heater models:
- ABS BLU ECO 100 H
- ABS BLU ECO 80 H
- ABS BLU R 100 H
- ABS BLU R 100 V
- ABS BLU R 30 V SLIM
- ABS BLU R 50 H SLIM
- ... (and many other models)
How to choose the right part
When selecting a safety valve, pay attention to the following parameters:
- Maximum pressure: Ensure that the valve you choose meets the requirements of your water heater.
- Thread diameter: Measure the thread of your water heater to avoid incompatibility.
- Compatibility: Check the list of compatible models to ensure the valve is suitable for your equipment.
Causes of failure and prevention
Failures of safety valves can occur for the following reasons:
- Excessive pressure in the system.
- Corrosion or contamination of the valve.
- Malfunctions in the water heater that cause overflow.
To prevent valve failure, it is recommended to:
- Regularly check the condition of the system and pressure levels.
- Perform timely maintenance on the water heater.
Replacement recommendations
Replacing the safety valve requires the following steps:
- Turn off the water heater and disconnect it from the power supply.
- Open the valve to release pressure in the system.
- Disconnect the old valve using a wrench.
- Install the new valve, ensuring that the thread is clean and undamaged.
- Tighten the valve, but do not overtighten to avoid damage.
- Reconnect the water heater and check the operation of the new valve.
Difficulty assessment for replacement
Replacing the safety valve is rated as moderate in difficulty. If you have basic skills in plumbing and electrical appliances, you should be able to complete this task yourself.