|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Valve for vibratory pump, d=29 mm
Description: This high-quality valve for vibratory pumps with a "head" diameter of 29 mm is designed to ensure reliable operation of pumps. Made from durable rubber, this valve guarantees longevity and wear resistance, making it an ideal choice for professional repair technicians and DIY enthusiasts.
Specifications
| Parameter | Value |
|---|---|
| Compatibility | Universal |
| Purpose | For pumps |
| Type | Spare parts |
| Head diameter | 29 mm |
| Seat diameter | 8 mm |
| Total height | 30 mm |
| Package contents | Valve – 1 pc. |
| Material | Rubber |
| Country of manufacture | Ukraine |
Compatibility
The valve is suitable for various pump models, including the Baby model, as well as other devices with similar specifications.
How to choose the right part?
When selecting a valve for a vibratory pump, pay attention to the following points:
- The head diameter and seat diameter must match your pump.
- Ensure that the valve material is suitable for your application and can withstand the expected loads.
- Check compatibility with your pump to avoid installation errors.
Possible causes of valve failure
The valve may fail for the following reasons:
- Material wear due to prolonged use.
- Contamination or clogging leading to malfunction.
- Incorrect installation or size mismatch.
How to prevent valve failure?
- Regularly clean the pump from dirt and deposits.
- Check the correct installation of the valve and its size compatibility.
- Avoid overloading the pump and monitor its operation.
Recommendations for valve replacement
- Turn off the pump and disconnect it from the power source.
- Drain water from the pump if necessary.
- Remove the old valve by carefully unscrewing the fasteners or unclipping the clamps.
- Clean the installation area from dirt and remnants of the old seal.
- Install the new valve, ensuring correct orientation and a tight fit.
- Secure the valve and reassemble the pump.
- Reconnect the pump to the power source and check its operation.
Difficulty of replacement
Replacing the valve for a vibratory pump is considered a moderately difficult task. It requires basic knowledge of pump operation and can be done independently if you follow the instructions and pay attention to details.
Remember, choosing and installing the valve correctly is key to the reliable operation of your pump!