|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Aquastop valve for the water supply hose of Bosch dishwasher 00645701
Product description: The Aquastop valve is an electromagnetic valve designed for reliable control of water supply in dishwashers. It provides leak protection and ensures safe operation. This valve is compatible with various brands such as Bosch, Balay, Constructa, Siemens, and Neff, making it an ideal solution for repairing and replacing faulty components in your dishwasher.
Technical specifications
| Parameter | Value |
|---|---|
| Connection diameter | 24.7 mm / Ø 10 mm |
| Hose length | 80 mm / 2 x 32 mm |
| Type | Bitron type 88 |
| Maximum pressure | 10 bar |
| Operating temperature | up to 70 °C |
| Protection class | IP67 |
| Original manufacturer code | 645701, 00645701 |
How to choose the right product
When selecting an Aquastop valve for your dishwasher, pay attention to the following points:
- Ensure that the original part code matches the one specified in your device.
- Check the connection diameter (24.7 mm and Ø 10 mm) and hose length (80 mm).
- Confirm compatibility with your brand, as this valve is suitable for Bosch, Balay, Constructa, Siemens, and Neff.
Possible causes of failure and prevention methods
The Aquastop valve may fail due to the following reasons:
- Accumulation of limescale, which can lead to valve blockage.
- Damage to wiring or the valve body due to mechanical impacts.
- Fault in the electrical circuit, which can cause improper valve operation.
To prevent valve wear, it is recommended to:
- Regularly clean filters and check for clogs.
- Monitor the condition of the hose and connections, replacing them as necessary.
- Inspect electrical connections for damage.
Difficulty of part replacement
Replacing the Aquastop valve has a medium level of difficulty. To perform the replacement, you will need to follow these steps:
- Disconnect the dishwasher from the power supply and water supply.
- Remove the access panel to reach the valve.
- Disconnect the old valve from the hose and electrical circuit.
- Install the new valve by following the same steps in reverse order.
- Ensure all connections are secure and perform a leak test.
It is recommended to consult a professional if you are unsure of your abilities or lack experience in appliance repair.
