|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Sealing rubber for Samsung Side-by-side refrigerator (freezer) (DA63-07738A)
Product description: The sealing rubber (DA63-07738A) is designed to ensure the airtightness of the freezer compartment in Samsung Side-by-side refrigerators. This part prevents cold air leakage, helping to maintain optimal temperature inside the freezer and saving energy.
Technical specifications
| Parameter | Value |
|---|---|
| Equivalent | DA90-04251A |
| Size | 1615x370 mm |
Compatibility with models
The sealing rubber is compatible with the following Samsung refrigerator models:
- RS542NCAESL/SE
- RS50N3403WW
- RS50N3503S8
- RS50N3513S8
- RS50N3513SA/EU
- RS50N3513WW
- RS50N3803SA
- RS50N3913SA
- RS52N3313SA
- RS52N3313WW
- RS54N3003SA
- RS54N3003WW
- RS54N3103S8/ST
- RS54N3003S8
- RSA1UHSL
- and many more...
How to choose the right product
When selecting the sealing rubber, pay attention to the following points:
- Check your refrigerator model. Ensure it is listed in the compatibility list.
- Measure the existing rubber to compare sizes: length and width should match 1615x370 mm.
- Inspect the condition of the old rubber. If it is cracked or has lost elasticity, this may indicate the need for replacement.
Possible causes of malfunction and prevention methods
Malfunctions of the sealing rubber can occur for the following reasons:
- Wear of the rubber due to aging.
- Damage from strong mechanical impact.
- Improper installation, which can lead to deformation.
To prevent premature wear, it is recommended to:
- Regularly check the condition of the rubber and clean it of contaminants if necessary.
- Avoid strong impacts on the seal when closing doors.
Difficulty of part replacement
Replacing the sealing rubber is a straightforward procedure and can be done independently. Here is a step-by-step guide:
- Remove the old rubber by gently pulling it away from the surface.
- Clean the installation area of any adhesive residue and dirt.
- Prepare the new rubber: ensure it matches the sizes.
- Install the new rubber by pressing it into place and securing it with adhesive if necessary.
- Check the airtightness by closing the door and ensuring there are no leaks.
The replacement time is about 30 minutes, and you will not need any special tools for this.