|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Seal for Electrolux refrigerator (2426448029)
The seal (or rubber gasket) for Electrolux refrigerators (part number: 2426448029) is designed to ensure the door of the refrigerator is airtight. It prevents the escape of cold air, which contributes to more efficient operation of the refrigerator and energy savings. This gasket is easy to install and is compatible with many models of Electrolux and Zanussi refrigerators.
Technical specifications
| Parameter | Value |
|---|---|
| Dimensions | 907 x 563 mm |
| Compatible models | 00874117_41853, S40340KG, ERB34003W, ERB34400W, ZKK34A0SSL, KF30968, S33400CSW0, ZNB323S, PC34, EN3401AKW, EN3403AOW, CB340 1C, LISTO, 987046_40760, ERB3440, ERB34402W8, ERB3452, ENB32201W, ZRB34ND8, R BOTTOM FR, ZRB34NS, ZRB634W, SB31510, ZKN3217, SB31512, 428591_41040, ZRB34NC8, LKM320GPL, 0-SERIE340, EN13401AW, EN3403AOW, 946.463-7, KSTF315-IB, ZKK3408, S73200CNW0, ARB34201W, CM3350DB, S4034KGEX1, ERB8445, S40340KG18, ERB34233W, S65320KG, ZRB634S, ZRB932FW2, ZRB34NA8, LFC223/92, SB315, ZKN3207S, FRB634MW, FRB934PW2, S40340KG1, ERB34003W1, 753_580, EN3402AOW, EN3409AFW, ENB32000W1, ENB32000W8, ZRB34NA, ZRB34NE, KF3097, KF32500, ZNB323S, S4532KGEX, S4532KGEX8, ZRB632FW, ZRB934PW, ZKK34A0, ERB34001W, ERB34031W, LAGAN, S53400CSW0, ERB8441, RJP3301, 337054_41552, 00585039_41915, 00428591_41851, ZRB334W, ZNB3240S, R5315A, ERB34300W, ERB3441S, ZNB32NC8, 00289829_41908, 00337054_41910, 00585039_41802, 00599330_41803, 00874117_41926, EN13400AW, CBFF320, ZANUSSI, ZKK3416C, ERB3442, ERB3447, ERB3451, 428591_41387, SB31511, NKV8314, ZKN3207, ARB34001W8, 515871_41368, 00289829_41956, 00428591_41580, 00585039_41957, S45320KG8, SB3360, ENB32003W, EN3401AOW, KF3096, ZRB34N, ZRB34NE8, S40340KG2, S60340KG, RJP3300, 00515871_41913, S45320KG, 00208984_41905, ZNB323W, KHBF336HWG, ENB32200W, S60340KG1, ERB34330W, ERB34003W8, ZKK3418, ZKK3418S, JLFFW175, ARB8251, ARB8451, EN3230COW, ZNB32NC, KF3420W, S73200CNW1, ERB3441, EN3400ADW, EN3401ADW, 00515871_41790, SB31513, 289829_41140, 301407_41247, LFCF223/92, ZRB34N8, ZRB34NC, CB340 1C, ZANUSSI, ARB34001W, KSTF315.2, ZKK34E0SSL, RCL302G, ERB34033W1, S40340KGEX, S4034KGEX8, RJP3302, KF34210, NKV8413, ZKK3415, ZKK3407, CBFF320, PRIVILEG, 946463_41246, KSTF315.1, EN3240AOW, 874117_40799, F336G, ZRB34ND, LKM320G, 289829_41956, 599330_41879, NKV9175, S40347KG, ERB34301W, ERB34301W8, ERB34402W, ZERB8441, FRB34NS, 428591_40706, S40340KG28, ERB34001W1, ERB34011W, ERB34200W, KF3539, ENB32433W1, EN3241AOW, EN3400AOW, KHFB336HSF, 987046_41041, 00301407_41909, ZRB34NS8, ZRB634DW, ZRB634W2, ZKK34E0, 987046_41852, ZNB323W, KHBF336HWF, KHFB336HSG, S33400CSW0, ENB32633W, ZRB8441W, ZRB934PW2, ZRB334PW, 00547236_41953, ERB34201W1, ERB8452, ERB34633W, ERB34001W8, FC1750S/6, ENB32000W, ENB32200W, ENB3240, 289829_41359, 00874117_41581, ZRB932CW, ZRB934PWH2, ZKN3217S, RCL30.1, 753_599 |
How to choose the right gasket
When selecting a gasket, it is important to pay attention to the following points:
- Dimensions: ensure that the gasket dimensions meet your requirements (in this case, 907 x 563 mm).
- Compatibility: check that the gasket is suitable for your refrigerator model. Verify the necessary part numbers listed in the compatibility table.
- Material: choose gaskets made from high-quality materials to ensure a long service life.
Causes of failure and prevention
Gaskets can fail for several reasons:
- Wear: over time, the gasket may lose its elasticity and airtightness.
- Mechanical damage: impacts or overloads can lead to damage to the rubber.
- Temperature fluctuations: rubber can crack with sudden temperature changes.
To prevent premature wear, regularly check the gasket for damage and clean it of contaminants. Ensure that the refrigerator door closes tightly and is not misaligned.
Difficulty of replacement
Replacing the gasket is a relatively simple procedure that can be done by yourself.
- Remove the old gasket by carefully pulling it away from the surface.
- Clean the installation area of any remnants of the old gasket and dirt.
- Install the new gasket, applying even pressure around the entire perimeter of the door.
- Check the airtightness: close the door and ensure it fits snugly.
The replacement process will take about 30 minutes and does not require special tools, making it accessible even for beginners.