|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Nut for air conditioner pipe, 1/4" M11*1.25 (1204)
Description: The nut for the air conditioner pipe is an essential component of the cooling and air conditioning system. It provides a secure connection between the system's tubes, allowing for efficient transfer of refrigerant or gas. This nut with M11*1.25 threading is suitable for 1/4" diameter tubes and is used in various climate control systems and refrigeration units.
Technical specifications:
| Connection type: | Threaded |
| Type of nut: | Hexagonal nut for 16 mm wrench |
| Thread size: | M11*1.25 |
| Tube hole diameter: | 7 mm (for 1/4" tubes) |
| Nut height: | 14 mm |
| Nut material: | Brass |
| Working environment: | Nitrogen, gaseous medium, refrigerant, aggressive environment |
| Manufacturer: | China |
How to choose the right product:
When selecting a nut for an air conditioner pipe, pay attention to the following parameters:
- Thread size: Ensure that the thread matches the specifications of your equipment (in this case, M11*1.25).
- Tube diameter: Check that the tube diameter is 1/4".
- Material: Brass provides good corrosion resistance and durability, so choose a nut made from this material.
Possible failure causes and prevention methods:
Nuts may fail for the following reasons:
- Corrosion: Use nuts with a protective coating when working in aggressive environments.
- Improper installation: Ensure that the nut is tightened correctly, but not excessively, to avoid damage.
- Thread wear: Regularly check connections for damage and replace worn parts.
Replacement difficulty:
Replacing the nut for an air conditioner pipe is a task of moderate difficulty and may require the following steps:
- Disconnect the air conditioner from the power source and ensure the system is discharged.
- Carefully unscrew the old nut using a wrench.
- Ensure that the threads and connection surface are clean and undamaged.
- Install the new nut, tightening it to the required torque.
- Check the connection for leaks before starting the system.
It is recommended to use a special wrench to achieve the necessary torque and prevent damage to the part.