|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Stainless steel hose with brass fittings (Ni coating)
The stainless steel hose with brass fittings coated with Ni is a reliable solution for water connections in your home or industrial setting. With high strength and corrosion resistance, this hose is ideal for both residential and industrial systems.
Specifications:
- Diameter: 12 mm (inner)
- Connection type: nut - nut
- Connection size: 1/2" x 1/2"
- Hose material: stainless steel
- Fitting material: brass with Ni coating
- Maximum pressure (P max): 9 bar
- Operating temperature range: from -70 °C to +130 °C
- Length: 100 cm
Advantages:
- High strength and wear resistance due to stainless steel.
- Brass fittings with Ni coating provide additional corrosion protection.
- Wide temperature range and resistance to high pressures.
How to choose the right part:
When selecting a hose, pay attention to the following points:
- Connection size: Ensure that the diameter and connection type (nut-nut) meet your requirements.
- Material: Stainless steel and brass with Ni coating ensure durability and reliability.
- Operating conditions: Make sure the hose can withstand the maximum pressure and temperature conditions in your application.
Causes of failure and prevention methods:
The most common causes of hose failure include:
- Corrosion due to exposure to chemicals.
- Overheating or exceeding the maximum allowable pressure.
- Mechanical damage due to improper installation.
To avoid failure, follow these recommendations:
- Check the hose and connections for damage before installation.
- Avoid exposure to aggressive chemicals on the hose.
- Ensure proper pressure and do not exceed temperature limits.
Replacement recommendations:
- Shut off the water supply and relieve pressure from the system.
- Remove the old hose by carefully unscrewing the nuts on both ends.
- Inspect the threads and sealing rings for damage.
- Install the new hose, ensuring it is properly secured.
- Check the connections for leaks after completing the replacement.
Replacement difficulty:
Replacing the hose is considered to be of medium difficulty. With basic plumbing connection skills, you should be able to perform the replacement yourself.