|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Flange for Ariston boiler with dry heating element
We present to you the flange for Ariston boiler, designed for the installation of a dry heating element. This component ensures secure attachment and efficient operation of your water heater. Please pay attention to its specifications and compatibility to select the right part for your device.
Product description
The flange has a diameter of 125 mm and an overall length of 480 mm, with a length of 422 mm (two sleeves) and 450 mm (one sleeve). Made from high-quality stainless steel, it guarantees durability and resistance to corrosion.
Specifications
| Parameter | Value |
|---|---|
| Purpose | For boilers and water heaters |
| Type | Flange |
| Overall length | 480 mm |
| Length of sleeves | 422 mm / 422 mm / 450 mm |
| Flange diameter | 125 mm |
| Heating element sleeve (x2) | Ø inner 14 mm |
| Thermostat probe sleeve | Ø inner 10 mm |
| Flange attachment | 2 hooks on the base perimeter + 5 holes 9x6.5 mm |
| Anode attachment | M6 threaded hole |
| Material | Stainless steel |
| Country of manufacture | Ukraine |
| Additional specifications | 3 tubes |
Compatibility
This flange is compatible with boilers from the following brands:
- Ariston
- Indesit
How to choose the right part
When selecting a flange for your boiler, pay attention to the following points:
- Dimensions: Ensure that the diameter and length of the sleeves match your boiler.
- Material: Choose parts made of stainless steel for increased corrosion resistance.
- Compatibility: Check that the flange is compatible with your boiler model.
Causes of failure and prevention
Flanges can fail for the following reasons:
- Corrosion - regular inspection and replacement of the anode can help prevent this.
- Improper installation - follow the installation and attachment instructions.
- Overheating - monitor the operating temperature settings of the boiler.
Replacement recommendations
Replacing the flange can be done by following these steps:
- Turn off the boiler and disconnect it from the power supply.
- Drain the water from the boiler.
- Remove the old flange by unscrewing the fasteners.
- Prepare the new flange for installation by placing the necessary gaskets.
- Secure the new flange to the boiler, ensuring a reliable attachment.
- Reconnect the boiler and check for leaks.
Difficulty assessment for replacement
Replacing the flange for the boiler is rated as medium difficulty. It requires some technical skills, so if you are unsure of your abilities, it is recommended to consult a professional.