|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
HEPA filter for Electrolux vacuum cleaner (4055174355)
HEPA filter 4055174355 is designed to improve air quality in spaces where a vacuum cleaner is used. It effectively captures fine dust particles, allergens, and other contaminants, ensuring cleanliness and health in your home. This filter is compatible with a range of Electrolux, AEG, Tornado, Volta, and Zanussi vacuum cleaner models.
Specifications and compatibility
| Manufacturer | Compatible models |
|---|---|
| AEG | ATF7630, ATF7625EL, ATF7620, ATF7640, ATF7630CH, ATF7610CH, ATF7660, ATF7625, ATF7650EL, ATF7640EL, ATF7650, ATF7610 |
| Electrolux | ZTF7620UK, ZTF7630, ZTF7610EL, ZTF7635UK, ZTF7640, ZTF7610, ZTF7660EL, ZTF7616, ZTF7660, ZTF7630EL, ZTF7660UK, ZEE2190, ZTF7600EL, ZTF7640UK, ZTF7620, ZTF7650, ZTF7650UK, ZTF7650EL, ZTF7640U, ZTF7615, ZEE2180 |
| Tornado | TOF7610, TOF7610EL |
| Volta | UF7615, UF7615EL |
| Zanussi | ZAN7620EL, ZAN7635, ZAN7620, ZAN7635EL |
How to choose the right HEPA filter
When selecting a HEPA filter, ensure it is compatible with your vacuum cleaner. Check your device's model number and compare it with the listed compatible models. Also, pay attention to the filter size to avoid installation issues. It is recommended to purchase original or certified filters to ensure maximum efficiency.
Possible causes of failure and prevention methods
HEPA filters can fail for several reasons:
- Clogging: Accumulation of dust and dirt can reduce filter efficiency. Regularly replacing the filter will help prevent this.
- Damage: Mechanical damage to the filter can occur during improper installation or use. Handle the filter carefully.
- Wear: Over time, filters lose their effectiveness. It is recommended to replace the filter every 6-12 months depending on the intensity of vacuum cleaner use.
Difficulty of filter replacement
Replacing the HEPA filter in an Electrolux vacuum cleaner typically does not require special skills and can be done independently. The process includes the following steps:
- Unplug the vacuum cleaner from the power source.
- Open the cover where the old filter is located.
- Carefully remove the old filter.
- Install the new filter in its place.
- Close the cover and turn on the vacuum cleaner.
The time required for replacement is about 5-10 minutes, making this process simple and accessible for most users.