|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
HEPA Filter for Gorenje Vacuum Cleaner (286171)
HEPA filter (High Efficiency Particulate Air) is designed for effective air filtration in Gorenje vacuum cleaners. This original filter can capture tiny particles as small as 0.1 microns, ensuring clean air and the health of users.
Technical specifications
| Parameter | Value |
|---|---|
| Seat length (±1 mm) | 112 mm |
| Total length (±1 mm) | 125 mm |
| Seat width (±1 mm) | 110 mm |
| Total width (±1 mm) | 124 mm |
| Total thickness (±1 mm) | 28-34 mm |
| Clip width (±1 mm) | 26 mm |
| Distance between fasteners (±1 mm) | 96 mm |
Compatibility with models
- Gorenje OK800EA 282047
- Gorenje VCK 1501 BCY III 282047
- Gorenje VCK1501BCYIII 282047
- Gorenje VCK1501BCYIII 301293
- Gorenje VCK1601 RCY III 282049
- Gorenje VCK1601RCYIII 282049
- Gorenje VCK1901OCY IV 366137
- Gorenje VCK1901OCYIV 366137
- Gorenje VCK2102BCY IV 366138
- Gorenje VCK2102BCYIV 366138
- Gorenje VCK2303GCY IV 366139
- Gorenje VCK2303GCYIV 366139
How to choose the right HEPA filter
When selecting a HEPA filter for your Gorenje vacuum cleaner, consider the following points:
- Check your vacuum cleaner model and ensure that the filter is compatible with it.
- Compare the filter dimensions with the original to avoid mismatches.
- Review the filter specifications: the higher the class (HEPA 13, HEPA 14, etc.), the better it filters the air.
Possible causes of failure and prevention methods
HEPA filters can lose effectiveness due to:
- Clogging with dust and dirt particles.
- Extended use without replacement.
To extend the filter's lifespan, it is recommended to:
- Regularly check and clean the filter as needed.
- Replace the filter according to the manufacturer's recommendations (usually every 6-12 months depending on usage intensity).
- Use the vacuum cleaner with the correct power and settings to reduce strain on the filter.
Difficulty of filter replacement
Replacing the HEPA filter in Gorenje vacuum cleaners is generally a straightforward task that can be done independently. To replace it, follow these steps:
- Turn off the vacuum cleaner and unplug it from the power source.
- Open the vacuum cleaner casing and locate the filter compartment.
- Carefully remove the old filter.
- Install the new filter, ensuring it is securely in place.
- Close the vacuum cleaner casing and plug it back into the power source.
The difficulty of replacement can be rated as low, and it does not require special tools.