|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
HEPA filter for Gorenje vacuum cleaner (286171)
HEPA filter for Gorenje vacuum cleaner (286171) is a high-quality alternative made in China, designed for effective air filtration in vacuum cleaners, ventilation systems, air conditioning, and air purification systems. This filter does not contain a foam layer, ensuring its lightweight and durability in operation.
Technical specifications
| Parameter | Value |
|---|---|
| Seat length (±1 mm) | 112 mm |
| Total length (±1 mm) | 125 mm |
| Seat width (±1 mm) | 110 mm |
| Total width (±1 mm) | 124 mm |
| Total thickness (±1 mm) | 28-34 mm |
| Clip width (±1 mm) | 26 mm |
| Distance between fasteners (±1 mm) | 96 mm |
Compatibility
This filter is compatible with the following vacuum cleaner models:
- OK800EA (282047)
- VCK1501BCYIII (282047)
- VCK1601RCYIII (282049)
- VCK1901OCYIV (366137)
- VCK2102BCYIV (366138)
- VCK2303GCYIV (366139)
- VCK 1501 BCY III (282047)
- VCK1501BCYIII (301293)
- VCK1601RCYIII (282049)
- VCK1901OCYIV (366137)
- VCK2102BCYIV (366138)
- VCK2303GCYIV (366139)
How to choose the right filter
When selecting a HEPA filter for your vacuum cleaner, consider the following points:
- Compare the filter dimensions (seat and total) with the original filter of your device.
- Ensure that the filter model is compatible with your vacuum cleaner.
- Pay attention to the presence of a foam layer, if it is important for your device.
Causes of failure and prevention methods
A HEPA filter may fail for the following reasons:
- Accumulation of dust and dirt, leading to reduced suction power.
- Premature wear due to prolonged use without replacement.
To avoid rapid wear of the filter, it is recommended to:
- Regularly check the condition of the filter and replace it at the first signs of contamination.
- Follow the replacement frequency guidelines provided in your vacuum cleaner's manual.
Difficulty of filter replacement
Replacing the HEPA filter is a relatively simple procedure that can be performed even by a novice in home appliance repair. Follow these steps:
- Unplug the vacuum cleaner from the power source.
- Remove the cover that provides access to the filter.
- Carefully extract the old filter.
- Install the new filter in place, ensuring it is oriented correctly.
- Close the cover and plug the vacuum cleaner back into the power source.
The time required to replace the filter is just a few minutes and does not require special tools.