|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Cylindrical filter for Karcher, Dewalt, AEG vacuum cleaners (6.414-552.0, 2.863-303.0)
Product description: The cylindrical filter (6.414-552.0, 2.863-303.0) is an original washable filter designed for class M cartridge vacuum cleaners. This filter provides a high level of dust filtration, including construction dust, brick dust, concrete, ceramics, sand, and wood shavings. The filter is suitable for use in both dry and wet cleaning modes due to its moisture resistance.
Technical specifications and compatibility
| Parameter | Value |
|---|---|
| Inner diameter | 8 cm |
| Outer diameter | 12.4 cm |
| Filter height | 11.5 cm |
| Depth of the mounting seat | 9.5 cm |
Compatible models:
- KARCHER: 1000, 4000 PLUS, 4000 TE, A 1000, A 1001, A 2000 - A 2099, A 2100 ... A 21990 (except A 2120), A 2200 - A 2299, A 2200 X ... A 2299 X, A 2500 - A 2599, A 2600 -A 2699, A 2600 X ... A 2699 X, A 3100 ... A 3199, MV 2, MV 3 / P / Premium, NT 27/1 ME/ADV, NT 48/1 TE, SE 4001, SE 4002, WD 2.000 ... WD 2.999, WD 2.200, WD 2 / Home, WD 3.000 - WD 3.999 (except WD 3.330), WD 3.300 M, WD 3 Car / Dakar, WD 3 P / Premium, WD 3 / Premium.
- DEWALT: D27900 (D279006).
- AEG: AR/AS 250.
- MILWAUKEE: AP250ECP, AS250ECP.
The filter replaces: Karcher 6.414-547.0, 6.414-552.0, 6.414-772.0, 9.755-260.0; Dewalt D279006, AEG 4932352303; Milwaukee 4932352303.
How to choose the right filter
When selecting a filter, pay attention to the following parameters:
- Compatibility with your vacuum cleaner. Ensure that the filter model number matches your vacuum cleaner's model number.
- Filter dimensions. Check the inner and outer diameter, as well as the height, to ensure the filter fits your device.
- Type of filter. Make sure the filter is designed for use in conditions that meet your needs (dry or wet cleaning).
Possible causes of malfunction and prevention methods
The filter may fail for the following reasons:
- Clogging of the filter with dust. It is recommended to clean the filter after each use and replace it at least once a year to maintain effective filtration.
- Wear of the filter material. Regular replacement of the filter will help avoid deterioration of its filtration properties.
To prevent rapid wear of the filter, avoid working with large dust and debris, and check its condition before each use.
Difficulty of filter replacement
Replacing the cylindrical filter is a simple procedure that can be done by yourself. To replace it, follow these steps:
- Disconnect the vacuum cleaner from the power supply.
- Remove the cover or protective element that holds the filter in place.
- Remove the old filter.
- Install the new filter, ensuring it is properly secured.
- Close the cover or protective element.
This procedure takes just a few minutes and does not require special tools.