|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Electromagnetic valve for gas water heater ZD201-B
Type: electromagnetic valve
Nominal voltage: 3 V
Diameter of the shut-off mechanism: 16 mm
Connection: plug (3 contacts)
Wire length: 50 mm (±2 mm)
Body dimensions: 42x46x43 mm
Mounting: 2 holes Ø4.5 mm
Application
The ZD201-B electromagnetic valve is designed to control the gas supply in gas water heaters and boilers. It ensures safe and stable operation of the equipment in both normal and emergency modes. This component is particularly important for maintaining the reliability and safety of gas systems.
Technical specifications and compatibility
| Specification | Value |
|---|---|
| Type | Electromagnetic valve |
| Nominal voltage | 3 V |
| Diameter of the shut-off mechanism | 16 mm |
| Wire length | 50 mm (±2 mm) |
| Body dimensions | 42x46x43 mm |
| Mounting | 2 holes Ø4.5 mm |
How to choose the right product
When selecting an electromagnetic valve, pay attention to the following parameters:
- Compare the nominal voltage with the specifications of your device.
- Ensure the compatibility of the shut-off mechanism diameter with your equipment.
- Check the wire length for ease of connection.
Always choose original or manufacturer-recommended parts to ensure the reliability and safety of the device's operation.
Causes of failure and prevention methods
The main causes of electromagnetic valve failure include:
- Wear or breakage of the spring.
- Malfunctions of the thermocouple or contacts.
- Clogging of the gas line, which can disrupt gas supply.
- Mechanical damage caused by improper installation or operation.
To prevent wear, it is recommended to regularly check the condition of the valve and perform maintenance. If problems are detected, it is essential to address the issues immediately.
Difficulty of replacement
Replacing the ZD201-B electromagnetic valve has a moderate level of difficulty. Follow these step-by-step instructions for replacement:
- Disconnect gas and electricity from the device.
- Remove the old valve by disconnecting the wires and fastenings.
- Install the new valve in place, ensuring correct connections.
- Secure the valve with fastening elements.
- Reconnect the wires and check the valve's functionality.
If you do not have experience working with gas systems, it is recommended to consult a qualified specialist to perform this operation.