|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Electric hotplate (ceramic glass) for Ariston electric stove C00265718
Part number: C00265718
Diameter: 300 mm
Rated power: 1050/1950/2700 W
Product description
The electric hotplate (ceramic glass) is designed for use in Ariston electric stoves and other compatible models. It features a three-zone design, allowing for the use of different zones for cooking. Ensure you make the correct choice to guarantee optimal performance of your electric stove.
Technical specifications
| Specification | Value |
|---|---|
| Voltage and frequency | 230 V, 50-60 Hz |
| Outer diameter | 300 mm (± 2 mm) |
| Outer diameter zone 1 | 145 mm (± 2 mm) |
| Outer diameter zone 2 | 210 mm (± 2 mm) |
| Outer diameter zone 3 | 270 mm (± 2 mm) |
| Number of contacts | 2 terminals (6.3 mm flat) |
Compatibility with models
- Ariston KBT6013T(BI)(T)
- Ariston KBT6013TIX(T)
- Ariston KBT6013T-CIX
- Ariston KBH8034TOIX(T)
- Ariston TT6140(NR)(T)
- Indesit TK63TBI
- Hotpoint-Ariston KRA631TB
- And many other Ariston and Indesit models
How to choose the right part
When selecting an electric hotplate, pay attention to the following aspects:
- Ensure the diameter (300 mm) matches your appliance.
- Check the input voltage (230 V) and power (1050/1950/2700 W).
- Compare the number and type of contacts with your old part.
If you have any doubts, consult an expert or refer to the user manual of your electric stove.
Possible causes of failure and prevention methods
Failure of the electric hotplate may be caused by:
- Overheating due to prolonged use at maximum power.
- Physical damage to the ceramic glass.
- Corrosion of contacts.
To prevent wear:
- Avoid overheating by using the appropriate power.
- Regularly clean the surface from contaminants.
- Check the condition of the contacts and clean or replace them if necessary.
Difficulty of part replacement
Replacing the electric hotplate may require basic skills in working with electrical equipment. It is recommended to follow these steps:
- Disconnect the electric stove from the power supply.
- Remove the old electric hotplate by disconnecting the contacts.
- Install the new electric hotplate, connecting the contacts according to the diagram.
- Test the operation of the new part by reconnecting the stove to the power supply.
The difficulty of replacement can be rated as low; however, if you are unsure of your abilities, it is advisable to consult a professional.