|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Fan motor SISME UNOX XBC/XVC 200W 230V
The SISME UNOX XBC/XVC fan motor is designed for use in various Unox equipment models. This reliable and powerful motor, with specifications of 200W and 230V, provides effective cooling and air circulation in your home appliances. With a shaft diameter of 12 mm and a length of 89 mm, it is compatible with many models, ensuring long-lasting and stable operation.
Technical specifications
| Parameter | Value |
|---|---|
| Power | 200W |
| Voltage | 230V |
| Shaft diameter | 12 mm |
| Shaft length | 89 mm |
| Manufacturer | SISME |
| Brand | Unox |
| Part type | Fan motor |
| Phase | 3 |
| Speed | 1 RPM |
| Frequency | 50 Hz |
| Net weight | 4.813 kg |
Compatible models
- Unox XB403
- Unox XB403G
- Unox XB603
- Unox XB603G
- Unox XB803
- Unox XB803G
- Unox XBC1004
- Unox XBC804
- Unox XBT146
- Unox XF185
- Unox XF188
- Unox XF190
- Unox XF193
- Unox XF195
- Unox XF199
- Unox XG413G
- Unox XG613G
- Unox XG813G
- Unox XV1003G
- Unox XV203G
- Unox XV303G
- Unox XV703G
- Unox XVC054
- Unox XVC304
- Unox XVC314G
- Unox XVC504
- Unox XVC514G
- Unox XVC704
- Unox XVC704P
- Unox XVT203G
How to choose the right product
When selecting a fan motor, pay attention to the following parameters:
- Power and voltage should match the requirements of your equipment.
- Shaft diameter and length must match the installed motor.
- Ensure that the motor model is compatible with your device by using the list of compatible models.
Possible causes of failure and prevention methods
The main reasons for fan motor failure may include:
- Overheating due to insufficient ventilation.
- Wear of bearings caused by inadequate lubrication.
- Electrical issues such as short circuits.
To prevent wear, it is recommended to:
- Regularly clean the motor from dust and dirt.
- Monitor the condition of ventilation openings and ensure proper air circulation.
- Check and replace worn components in a timely manner.
Difficulty of part replacement
Replacing the fan motor is of medium difficulty. It is recommended to follow this procedure:
- Disconnect the device from the power supply.
- Remove protective panels to access the motor.
- Disconnect electrical connections and remove the old motor.
- Install the new motor, connect the wires, and secure it in place.
- Check the installation for correctness and reassemble the device.
If you do not have experience working with electrical components, it is better to consult a professional.