|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Motor for outdoor unit air conditioner YPY-20-6 L
Description: The YPY-20-6 L motor is designed for use in outdoor units of air conditioners. It provides rotation for the fan and supports air circulation, contributing to the efficient operation of the cooling or heating system. This motor is compatible with various air conditioner models, making it a versatile solution for replacing a damaged part.
Technical specifications:
| Parameter | Value |
|---|---|
| Voltage and frequency | 220-240V, 50Hz |
| Power | 20 W (0.2 A) |
| Direction of shaft rotation | Clockwise |
| Shaft diameter | 8 mm (with flat 8*7 mm) |
| Shaft length from dust cover to start of thread | 44 mm (±1 mm) |
| Length of shaft thread | 11 mm (±1 mm) |
| Thread diameter | 6 mm |
| Shaft length from dust cover to start of flat | 23 mm (±1 mm) |
| Total length (motor and shaft) | 170 mm (±1 mm) |
| Body height | 75 mm (±1 mm) |
| Body diameter | 96 mm (±1 mm) |
| Motor mounting holes | 4 pcs. Ø 5.5 mm (S center-to-center=90 mm) |
| Connection | 3 terminals ("female") + 1 ground |
| Capacitor required for connection | 2 µF, 450 V |
| Cable length | 0.9 m |
| Marking | YPY-20-6 |
How to choose the right product:
When selecting a motor for your air conditioner, pay attention to the following parameters:
- Power and voltage: ensure they match the requirements of your device.
- Shaft dimensions: check the diameter and length of the shaft to avoid mismatches during installation.
- Compatibility: verify if the YPY-20-6 L model is suitable for your air conditioner based on the technical description.
Possible causes of failure and prevention methods:
The motor may fail due to the following reasons:
- Overheating due to fan contamination or insufficient lubrication.
- Electrical failures: voltage spikes or temporary short circuits.
- Mechanical damage to the shaft.
To prevent wear, regularly clean the ventilation grilles and monitor the condition of the electrical wiring. Use voltage stabilizers to protect against fluctuations.
Difficulty of part replacement:
Replacing the YPY-20-6 L motor requires basic skills in working with electrical appliances. Follow these steps:
- Disconnect the power to the air conditioner.
- Remove the cover of the outdoor unit.
- Disconnect the old motor from the electrical terminals.
- Remove the motor by unscrewing the mounting bolts.
- Install the new motor, secure it, and connect the terminals.
- Reassemble the unit and turn on the air conditioner.
The difficulty of replacement can be rated as moderate. If you lack experience, it is recommended to consult a specialist.