|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Motor for Karcher vacuum cleaner Domel (6.490-168.0)
Product description: The motor for the Karcher vacuum cleaner Domel (6.490-168.0) is a key component that provides power and efficiency for the vacuum cleaner. With a diameter of 145/78 mm and a height of 38/148 mm, this motor is perfectly suited for models with a water filter from Karcher. Replacing the motor enhances cleaning performance and ensures the longevity of the device.
Technical specifications and compatibility
| Parameter | Value |
|---|---|
| Diameter | 145/78 mm |
| Height | 38/148 mm |
Compatibility with models:
- DS 5500 vacuum cleaner with water filter KÄRCHER 1.195-101.0
- DS 5500 *CH KÄRCHER 1.195-102.0
- DS 5500 *AU KÄRCHER 1.195-103.0
- DS 5500 *GB KÄRCHER 1.195-104.0
- DS 5500 *BR KÄRCHER 1.195-105.0
- DS 5500-UL KÄRCHER 1.195-107.0
- DS 5500 *AR KÄRCHER 1.195-108.0
- DS 5500 TV *GB KÄRCHER 1.195-109.0
- DS 5500 vacuum cleaner with water filter KÄRCHER 1.195-111.0
- DS 5500 CCC *CN KÄRCHER 1.195-114.0
- DS 5500 -ABG *EU KÄRCHER 1.195-116.0
- DS 5500 vacuum cleaner with water filter KÄRCHER 1.195-117.0
- DS 5500 *KAP KÄRCHER 1.195-119.0
- DS 5500 *EU-II KÄRCHER 1.195-120.0
How to choose the right product
When selecting a motor for your Karcher vacuum cleaner, pay attention to the following parameters:
- Ensure that the dimensions (diameter and height) of the motor meet your requirements.
- Check compatibility with your vacuum cleaner model using the model number and codes listed in the compatibility section.
- If in doubt, consult a professional or contact customer support.
Possible causes of failure and prevention methods
The vacuum cleaner motor may fail for several reasons:
- Overheating: can occur due to prolonged operation without breaks. It is recommended to take short pauses.
- Clogging: regular cleaning of filters and dust bags will help prevent clogging and extend the motor's lifespan.
- Bearing wear: check and lubricate bearings to avoid premature wear.
Difficulty of part replacement
Replacing the Karcher vacuum cleaner motor is of medium difficulty and can be done independently with basic tool skills. We recommend following these steps:
- Disconnect the vacuum cleaner from the power supply.
- Remove the cover by unscrewing the screws.
- Disconnect the old motor from the wires and mounts.
- Install the new motor in place and connect the wires.
- Secure the cover and ensure all parts are properly installed.
- Reconnect the vacuum cleaner to the power supply and conduct a test.
If necessary, refer to the user manual for more detailed instructions.