«Payment by installments» of monobank
payments
of $7.33
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Vacuum cleaner motor VCM-09, 1800W
The vacuum cleaner motor VCM-09 with a power of 1800W is ideal for replacement in various models of vacuum cleaners from brands such as Electrolux, Zanussi, AEG, and others. Its design is intended for efficient operation in dry cleaning mode. This part helps ensure stable operation of the vacuum cleaner, improving its suction power and overall performance.
Specifications
| Parameter | Value |
|---|---|
| Power | 1800 W |
| Voltage and frequency | ~230 V, 50-60 Hz |
| Connection | 4.8 mm terminal – 2 pcs. |
| Overall height of the motor | 107 mm (±2 mm) |
| Body diameter | 83 mm (±2 mm) |
| Turbine height | 23 mm (±2 mm) |
| Turbine diameter | 138 mm (±2 mm) |
| Suction hole diameter | 31 mm |
| Material | Metal |
| Quantity | 1 pc. |
| Marking | VCM-09, VC07W1052AG |
| Country of manufacture | China |
| Manufacturer | Whicepart |
How to choose the right motor
When selecting a motor for your vacuum cleaner, pay attention to the following parameters:
- Model and marking: Ensure that the motor model matches your vacuum cleaner model.
- Power: Check that the motor power meets the requirements of your device.
- Dimensions: Compare the dimensions (height and diameter) of the new motor with the installed one.
- Connection type: Ensure that the terminal connection type matches your vacuum cleaner.
Causes of failure and prevention methods
The main causes of motor failure include:
- Clogging of the vacuum cleaner filters, leading to motor overheating.
- Using the vacuum cleaner at high power for extended periods.
- Incorrect connection of electrical wires.
To prevent motor wear, it is recommended to:
- Regularly clean the filters and dust container.
- Avoid using the vacuum cleaner at maximum power unnecessarily.
- Check the condition of the wiring and connections before use.
Difficulty of motor replacement
Replacing the VCM-09 vacuum cleaner motor requires attention and basic tool skills. The process can be broken down into the following steps:
- Disconnect the vacuum cleaner from the power supply.
- Remove the vacuum cleaner casing.
- Disconnect the old motor from the terminals.
- Install the new motor, connecting it to the terminals.
- Reassemble the vacuum cleaner casing.
The difficulty of replacement can be rated as moderate, and the task may take between 30 to 60 minutes depending on your experience.
