«Payment by installments» of monobank
payments
of $9.00
No commission. The customer`s billing phone number must match the monobank customer`s financial number
176mm motor for Makita vacuum cleaner
Description: This 1400 W motor, with a height of 176 mm and a diameter of 143 mm, is designed for replacement in Makita vacuum cleaners, including models with a two-stage LPA system (HWX-CG25). This universal motor is compatible with many models and ensures efficient vacuum operation thanks to its design and powerful specifications.
Technical specifications:
| Feature | Value |
|---|---|
| Type | Bypass, peripheral type, two-stage |
| Power | 1400 W |
| Height (H) | 176 mm |
| Impeller diameter | 143/149 mm |
| Impeller height | 67 mm |
| Turbine hole diameter | 44 mm |
| Top diameter | 78 mm |
| Distance between brush edges | 123 mm |
| Distance between screw holes | 84 mm |
How to choose the right product:
When selecting a motor for your vacuum cleaner, consider the following points:
- Compare power: ensure the motor's power matches the original.
- Check dimensions: height and diameter should match your vacuum cleaner's specifications.
- Pay attention to the mounting type: this motor is secured with 4 screws.
- Ensure compatibility with your vacuum cleaner model.
Possible causes of failure and prevention methods:
The motor may fail for the following reasons:
- Overheating: can be caused by clogged filters or blocked air ducts. Regularly clean the filters.
- Bearing wear: avoid operating under overload. Check the condition of the bearings and replace them if necessary.
- Electrical faults: inspect wiring and connections for damage.
Difficulty of part replacement:
Replacing the motor is a task of medium difficulty. It is recommended to follow these steps:
- Disconnect the vacuum cleaner from the power supply.
- Remove the vacuum cleaner casing by unscrewing the necessary screws.
- Disconnect the old motor by carefully unscrewing the screws and disconnecting the electrical connections.
- Install the new motor, connect the electrical connections, and secure it in place.
- Reassemble the vacuum cleaner casing and conduct a device test.
Ensure all connections are secure to avoid further malfunctions.
