|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Surface temperature sensor for Electrolux induction cooktops (140048472090)
Length: 450 mm
General description
The Electrolux surface temperature sensor (part number 140048472090) is designed for use in induction cooktops, providing accurate temperature measurement for optimal device performance. This sensor helps prevent overheating and ensures safe cooking. Replacing the sensor can restore the proper functioning of the cooktop and improve its efficiency.
Technical specifications and model compatibility
| Length | Compatible models |
|---|---|
| 450 mm | ZIT6460XB LX6, Zanussi 949492172 ZIL6340CB NW8, Zanussi 949492287 ZIT6360CB NG7, Zanussi 949492288 FIT6340CB NR3, Faure 949492289 ZIT6460CB NG9, Zanussi 949492297 RIT6460XB NH1, Rosenlew 949492300 ZIT6360BB NR7, Zanussi 949492303 ... (The list of compatible models continues) |
How to choose the right product
When selecting a temperature sensor, it is important to pay attention to the following points:
- Check the length of the sensor — ensure it is suitable for your cooktop model (in this case, 450 mm).
- Model compatibility — verify that the part number (140048472090) matches your cooktop.
- Quality of the part — choose original or certified parts to ensure reliability.
Possible causes of failure and prevention methods
The temperature sensor may fail for several reasons, including:
- Overheating: Prolonged use at high temperatures can lead to damage.
- Mechanical damage: Impacts or drops can disrupt the sensor's operation.
To prevent wear, it is recommended to:
- Regularly check the condition of the cooktop and sensor.
- Avoid overheating the cooktop and prevent sudden temperature changes.
Difficulty of part replacement
Replacing the temperature sensor may require basic skills in appliance repair. The process can take between 30 to 60 minutes, depending on experience. Here is a step-by-step guide:
- Disconnect the cooktop from the power supply for safety.
- Remove the decorative panel (if necessary) to access the sensor.
- Unscrew the mounting screws and carefully remove the old sensor.
- Install the new sensor, ensuring it is properly connected.
- Tighten the screws and replace the decorative panel.
- Reconnect the cooktop and check its operation.
If you are unsure of your abilities, it is better to consult a professional for part replacement.