|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Buffer ring for submersible pump BЦПЭ Vodolet
Description: The buffer ring for the BЦПЭ Vodolet submersible pump is a reliable part designed to enhance the performance of pumps. It serves as a damping element, preventing vibrations and noise, while also protecting the pump from mechanical damage. Made from high-quality rubber, it ensures durability and wear resistance.
Specifications
| Characteristic | Value |
|---|---|
| Compatibility | Vodolet |
| Purpose | For pumps |
| Type | Spare parts |
| Inner diameter | 72 mm |
| Outer diameter | 92 mm |
| Thickness | 10 mm |
| Material | Rubber |
| Quantity | 1 |
| Country of origin | China |
| Additional characteristics | Color - black |
Compatibility
The buffer ring is suitable for the following models:
- Vodolet НВП-0,32-32У
- and other Vodolet pump models
How to choose the right spare part
When selecting a buffer ring, pay attention to the following points:
- Check the dimensions: inner and outer diameter, as well as the thickness of the ring.
- Ensure compatibility with your pump. It is best to refer to the manual or specifications of the device.
- Evaluate the material from which the ring is made. The rubber should be of high quality and wear-resistant.
Causes of failure and prevention
Buffer rings most often fail for the following reasons:
- Wear due to prolonged use.
- Incorrect installation, which can lead to damage to the ring.
- Exposure to aggressive chemicals.
To avoid failures, follow these recommendations:
- Regularly check the condition of the ring and replace it at the first signs of wear.
- Install the ring according to the instructions, avoiding misalignment and excessive tension.
- Avoid contact with aggressive substances that can damage the rubber surface.
Replacement recommendations
Replacing the buffer ring is a relatively simple process that can be done independently:
- Disconnect the pump from the power supply.
- Remove the pump from its installation location if necessary.
- Remove the old buffer ring by carefully extracting it from its seat.
- Clean the seat from dirt and remnants of the old ring.
- Install the new buffer ring, ensuring correct orientation and a snug fit.
- Reassemble the pump and reconnect it to the power supply.
Replacement difficulty
Replacement difficulty rating: Low. Even a beginner can handle the replacement process with basic tools.