|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Control and ignition module for gas water heater GCO-AE-10L (0904)
The control and ignition module is designed for flue gas water heaters. This electronic module ensures reliable ignition and operation management of gas equipment, which is critical for the safety and functionality of your appliances. With this module, you can restore the operation of your gas water heater, ensuring stable and safe use.
Technical specifications
| Parameter | Value |
|---|---|
| Purpose | For flue gas water heater |
| Type | Module |
| Module type | Electronic |
| Power supply | 3 V |
| Dimensions (W*D*H) | 54*83*28 mm |
| Mounting hole spacing | 60 mm |
| Electrodes | Ignition - 2 pcs., ionization - 1 pc. |
| Electrode wire length | 310 mm |
| Ground connection | For M4 bolt |
| Ground wire length | 190 mm |
| Sensor connection terminals | 2 pcs. (6.3 mm) |
| Sensor wire length | 580 mm |
| Display connections | 6-pin plug |
| Display wire length | 125 mm |
| Power connection | 2 pcs. terminals ("female") - 4.8 mm |
| Power wire length | 890 mm |
| NTC sensor connections | 2-pin plug |
| NTC sensor wire length | 240 mm |
| Micro switch connections | 3-pin plug |
| Micro switch wire length | 190 mm |
| Gas valve connections | 3-pin plug |
| Gas valve wire length | 220 mm |
| Country of manufacture | China |
How to choose the right product
When selecting a control and ignition module, it is important to consider the following parameters:
- Compatibility with your gas water heater. Compare the dimensions and electrical specifications of the module with your device.
- Pay attention to the type of wire and terminal connections. Ensure they meet the requirements of your equipment.
- Check that the module has the necessary electrodes and connections for safe operation.
Possible causes of failure and prevention methods
The most common causes of failure for the control and ignition module include:
- Voltage overload. Install a voltage stabilizer to protect the equipment.
- Improper installation. Ensure all connections are made correctly and securely.
- Electrode wear. Regularly check and replace electrodes as needed.
To prevent wear, it is recommended to perform regular maintenance on your gas water heater.
Difficulty of replacing the control module
Replacing the control and ignition module can vary in difficulty depending on the model of the heater. In most cases, this can be done by a non-professional, but for safe replacement, we recommend following these steps:
- Disconnect gas and electricity from the heater.
- Remove the old module by disconnecting all connections.
- Install the new module, connecting all wires according to the diagram.
- Check all connections and ensure they are secure.
- Turn on the gas and electricity, and check the operation of the heater.
Difficulty rating: low. If you have basic electrical skills, you can replace the module yourself.